The Ice-O-Matic ICE0250FW-B40PS is a combination of the Ice-O-Matic ICE0250FW water-cooled full cube ice machine and the B40PS storage bin. The Ice-O-Matic ICE0250FW cuber head is capable of producing up to 333 LB of Full Sized cube ice every 24 hours. The Full Sized Cube measures 7/8" x 7/8" x 7/8" and is commonly used for beverages and dispensing applications. The Ice-O-Matic ICE0250FW requires a 115-volt electrical connection, two water lines in (one for making ice and a second for cooling the condenser), and a drain for both the purged water each ice making cycle AND for the circulated water from cooling the condenser. Because it is a water-cooled ice machine, the ICE0250FW will use significantly more water than a comparable air-cooled model (an additional 177 gallons of water per 100 LB of ice produced will be flushed). However, one of the benefits to water-cooled models is there will be no hot air vented into the area and the unit will not require any additional side clearances. Therefore, the Ice-O-Matic ICE0250FW would work well if you have a narrow space for installation.
The Ice-O-Matic B40PS storage bin is 30 inches wide with a storage capacity of up to 344 LB of ice. The storage bin is a total of 37.5" high with the adjustable legs measuring at 6". The Ice-O-Matic B40PS is constructed with a stainless steel exterior and an inner polyethylene liner with a layer of foam insulation between. The B40PS bin door is molded plastic and flips up for easy access to ice for scooping. A bin drain for any melted ice is located at the back of the unit, so your bin remains free of any standing water.
With the low profile ICE0250FW cuber head sitting on top of the bin, the total height of the equipment combination is only 57.5" high. Both of these pieces of equipment are 30 inches wide. With these dimensions, the Ice-O-Matic ICE0250FW-B40PS cuber head and bin combo is ideal for locations with a moderate daily ice requirement and limits to their ceiling overhead space, as well as left-to-right installation space.
Ice-O-Matic ICE0250FW Features
ICE Series Modular Cube Ice Machine
Up to 333 LB ice production / 24 hours
30" Wide Cabinet is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B40PS Details
Ice Storage Bin
Up to 344 LB storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation