The Ice-O-Matic ICE0250FW-CD40030 is a 30" wide, water-cooled, full cube ice machine that is capable of producing up to 333 pounds of ice a day combined with a hotel ice dispenser. The cuber head is a low-profile model at 20" high. The full-size cube ice that the Ice-O-Matic ICE0250FW produces measures 7/8" x 7/8" x 7/8", making it ideal for beverages such as "on-the-rocks" drinks, since it takes a while to melt. The Ice-O-Matic ICE0250FW requires a 115 volt electrical connection, two water lines in (for making ice and cooling the condenser), and a drain for both purged water at the end of each ice-making cycle and the waste-water from cooling off the condenser. Because it is a water-cooled model, there will be a large volume of water drained each cycle (up to 177 gallons per 100 pounds of ice made).
The Ice-O-Matic CD40030 hotel ice dispenser measures 54 inches tall. Note that the Ice-O-Matic CD40030 does require a 115 Volt, 60Hz, 1-Phase electrical power source. The exterior of the hotel ice dispenser is constructed from stainless steel and fingerprint-proof plastic. The installation location also requires a drain for any melted ice in the dispenser's bin (this can be the same floor drain the water-cooled cuber head uses). The Ice-O-Matic CD40030 has a storage capacity of up to 180 pounds of ice. The push activation feature for ice dispensing, the large dispensing chute, and wide ice filling area means that the Ice-O-Matic CD40030 can accommodate nearly any size ice bucket. In addition, Ice-O-Matic has incorporated their Turbo Dispense technology, which means that ice is dispensed at a speed of 1/4 pound of ice per second.
Together the Ice-O-Matic ICE0250FW-CD40030 cuber head and hotel ice dispenser combo are perfect together since they only measure 74" high with the cuber head mounted on the dispenser. With the Ice-O-Matic ICE0250FW producing 333 LB of ice every 24 hours and the CD40030's internal bin storing 180 pounds at a time, you need not worry about your customers or employees running out of ice.
Ice-O-Matic ICE0250FW Features
Full-Size Cube Ice
333 LB Production/24 Hours
30" Wide Cuber Head is Low Profile at 20"High
115v/60/1-ph, 10.8 amps
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispense
Exterior constructed from stainless steel and fingerprint-proof plastic
180 LB Storage Capacity, 30" Wide
Ice-O-Matic Ice Machine and Dispenser Benefits
Harvest Assist Provides Consistent Ice production
Pure Ice® Built In Antimicrobial Protection with AgIon compound incorporated into surfaces water and ice contact
Durable Electro-less Nickel Plating On The Evaporator Plate
Construction from Corrosion-Resistant Stainless Steel & Fingerprint-proof Plastic
Ultra-Low Profile Design - 74" High for 2 piece combo
Turbo Dispense Dispenses 1/4 LB Of Ice Per Second