The Ice-O-Matic ICE0250HA is an air-cooled, half-cube, modular ice machine that is capable of producing up to 336 pounds of ice a day. This 30-inch wide cuber head will require a minimum of 6" of clearance on both sides for air intake and exhaust vents. The Ice-O-Matic ICE0250HA produces half cube ice which measures 7/8" x 7/8" x 3/8" which makes them perfect for filling beverage glasses. Half cubes are also great for blended drinks because the cube is hard enough to be chopped by the blades but small enough to avoid jamming the machine. The Ice-O-Matic ICE0250HA is easy to install, since it only requires a 115 volt electrical connection, a water line in, and a drain for purged water at the end of each ice-making cycle. In addition, Ice-O-Matic has incorporated its Harvest-Assist technology to help remove ice from the evaporator surface more quickly, saving time and electricity each cycle.
The Ice-O-Matic B25PP storage bin is 30 inches wide and can hold 242 pounds of ice. The storage bin is a total of 28 inches high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B25PP with a rotocast plastic exterior and an inner polyethylene liner with a layer of foam insulation. The storage bin door is molded plastic and flips up for easy access to ice for scooping. At the back of the Ice-O-Matic B25PP, there is a bin drain for any water from melted ice, in order to prevent standing water from becoming a breeding ground for bacteria and other organisms.
With the Ice-O-Matic ICE0250HA cuber head sitting on top of the B25PP bin, the total height of the equipment combination is only 48 inches high. At this height, the Ice-O-Matic ICE0250HA-B25PP cuber head and bin combo is ideal for locations with a moderate daily ice requirement and strict limits to ceiling overhead space. Both the ICE0250HA and the B25PP have built-in antimicrobial protection with the AgIon compound incorporated into the surfaces that come into contact with water or ice. So you and your customers are protected and you only serve the purest cleanest ice.
Ice-O-Matic ICE0250HA Features
ICE Series Modular Cube Ice Maker
336 LB Ice Production / 24 hours
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces water and ice contact
Durable, Electro-less Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B25PP Features
Ice Storage Bin
Up to 242 LB storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Line Is Insulated w/ Foam For Maximum Ice Preservation