The Ice-O-Matic ICE0250HW-CD40130 is a 30" wide, water-cooled, half cube ice machine combined with a hotel ice dispenser. The Ice-O-Matic ICE0250HW produces up to 333 pounds of ice a day. This cuber head is a low-profile model at 20" high. The half-size cube ice that the Ice-O-Matic ICE0250HW makes measures 7/8" x 7/8" x 7/8", so this ice maker works very well with an ice dispenser such as the CD40130. The smaller cube means there is less chance for jamming the dispenser. Half cubes are also great for blended beverages. The Ice-O-Matic ICE0250HW does require a 115 volt electrical connection. This water-cooled model also requires two incoming water lines (one for making ice and one for cooling the condenser). Another installation requirement is a drain for the mineral-laden purged water at the end of each ice-making cycle and the warm waste-water from cooling off the condenser. The Ice-O-Matic ICE0250HW will drain a large amount of water every ice-making cycle (up to 177 gallons per 100 pounds of ice produced). However, since there are no fans being used to cool the condenser, there will be no hot air vented into the surrounding area.
The 30" wide Ice-O-Matic CD40130 Hotel Ice Dispenser model has both Ice & Water Dispensing chutes. Both of the dispensers are push-operated and the water and ice dispensing area is wide enough to accommodate most ice buckets or water jugs. This hotel ice dispenser has an exterior that is constructed from stainless steel and fingerprint-proof plastic. The CD40130 is a 54" high floor model ice dispenser that requires a Cuber head such as the ICE0250HW mounted on top. The Ice-O-Matic CD40130 has a built in storage bin that can hold up to 180 LB of ice at one time. The ice-dispensing mechanism has a Turbo Dispense feature which allows ice to be dispensed at a rate of 1/4 LB per second. The Ice-O-Matic CD40130 also has a power clean feature for easy cleaning. As with most Ice-O-Matic equipment, AgIon antimicrobial protection is built into the interior surfaces that come into contact with water and ice. The ice dispenser cabinet is constructed with stainless steel and fingerprint-proof rotocast plastic.
With the cuber head mounted on the dispenser, the Ice-O-Matic ICE0250HW-CD40130 cuber head and hotel ice dispenser combination only measures 74" high. Since the Ice-O-Matic ICE0250HW produces 333 LB of ice each day (about 14 pounds of ice every hour) and the CD40130's bin stores 180 pounds at a time, you should always have ice ready to be dispensed. The Ice-O-Matic ICE0250HW-CD40130 will be your customers' and employees' one-stop destination for both ice and water.
Ice-O-Matic ICE0250HW-CD40130 333 LB 30" Water-Cooled Ice Machine w/ CD40130 Hotel Dispenser.
ICE Series Ice Maker, Produces Half Cube Style Ice, 333 LB production/24 hours. Has self-contained, water-cooled condenser. 30 inches wide, 20 inches high. 115 Volts, 60Hz, 1-phase, 10.8 amps. Paired with 30-inch wide Hotel Ice Dispenser with Push Chute Ice Dispensing and Integrated Ice Storage Bin with 180 pound capacity, plus integrated Push Lever Activated Water Dispenser. 115 Volts, 60Hz, 1-phase, 2.1 amps. 73.25 inches total height.
Starting at: $4,591.65 - In stock Brand:
ice0250hw-cd40130 Product ID:
Ice-O-Matic ICE0250HW Features
ICE Series Modular Cube Ice Maker
Half Cube Style Ice
333 LB Ice Production/24 Hours
30" Wide Cuber Head is Low Profile at 20" High
115v/60/1-ph, 10.8 amps
Ice-O-Matic CD40130 Features
Vending Hotel Ice and Water Dispenser
Floor Model, Push Dispensing w/ Water Dispenser
Exterior constructed from stainless steel and fingerprint-proof plastic
180 LB Storage Capacity, 30" Wide
Ice-O-Matic Ice Machine and Dispenser Benefits
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces water and ice contact
Harvest Assist Produces Ice Consistently/Reduces Operation Cost
Constructed From Corrosion-Resistant Stainless Steel & Fingerprint-Proof Plastic
Power Clean Allows Access To The Bin For Easy Cleaning w/o Moving The Ice Machine