The Ice-O-Matic ICE0320FA is a Modular style ice machine that produces up to 334 pounds of Full sized Cube ice every 24 hours. Ice-O-Matic's full cube ice measures 7/8 inches by 7/8 inches by 7/8 inches and lasts a long time while cooling beverages. The unit requires 115 volt, 60 Hz, 1-Phase power supply. The Ice-O-Matic ICE0320FA cuber head is just over 22 inches wide. Note that the Ice-O-Matic ICE0320FA has an air-cooled condenser. Air intake vents are in the rear of the unit and exhaust vents are on the right side when facing the unit. A minimum of 6 inches of clearance are required for proper air flow per the manufacturer. The space-saving 22-inch wide design also would suit a location where available wall space is at a premium (minimum of 28 inches left to right). The Ice-O-Matic ICE0320FA utilizes Ice-O-Matic's Harvest Assist technology to shorten the ice making cycle and reduce energy consumption.
The Ice-O-Matic B42PS storage bin is 22 inches wide and can hold 351 LB of ice. The storage bin is a total of 50" high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B42PS with stainless steel exterior and an inner polyethylene liner with a layer of foam insulation between. The bin door is molded plastic and flips up for easy access to ice for scooping. There is also a built in ice scoop holder on the inner wall of the bin. A bin drain is located at the back of the unit to allow melted ice to drain.
Together the Ice-O-Matic ICE0320FA mounted on the B42PS storage bin measure just over 73" high. Both units are 22" wide (plus 6" for air vent clearance), so this ice machine and storage bin combo is ideal for locations where you have minimal space left to right (28" minimum) and over head space is limited (just over 6 feet is required). Ice-O-Matic has incorporated its PURE ICE technology into all ice making surfaces that come into contact with water or ice, providing built-in AgIon antimicrobial protection for both pieces of ice making equipment. With a production rate of 334 LB per day and a storage capacity of 351 LB, this equipment combo allows you to make and store a moderate amount of ice so the Ice-O-Matic ICE0320FA-B42PS would be a good choice for a foodservice business with moderate ice requirements.
Ice-O-Matic ICE0320FA-B42PS 334 LB 22" Air-Cooled Full Cube Ice Machine w/ Storage Bin.
ICE Series Modular Cube Ice Maker, 22" wide, air-cooled, approximately 334 lb production/24 hours (Rated at 70 degrees F Air Temp / 50 degrees F Water), Full Size Cube, filter-free air, Stainless Steel and Molded Plastic Exterior, PURE ICE built in antimicrobial protection, Harvest assist produces Ice consistently/reduces operating cost, 115v/60/1-ph, 13.2 amps, UL, NSF, CE
B42PS Bin Capacity 351 lbs, Stainless Steel bin exterior, molded plastic bin door.
Starting at: $3,050.00 - In stock Brand:
ice0320fa_b42ps Product ID:
Ice-O-Matic ICE0320FA Features
ICE Series Modular Cube Ice Maker
Cuber Head is just over 22" wide
Produces up to 334 LB Full Cube Ice / 24 hours
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B42PS Features
Ice Storage Bin
351-lbs. Storage Capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation