The Ice-O-Matic ICE0320FW is a water-cooled Modular style ice machine that produces up to 349 pounds of Full-sized Cube ice every 24 hours. Ice-O-Matic's full cube ice measures 7/8 inches by 7/8 inches by 7/8 inches and lasts a long time while cooling beverages, so there is little dilution of your drink. The ICE0320FW requires a 115 volt, 60 Hz, 1-Phase power supply and two incoming water lines (one for ice-making and one to cool the condenser). The Ice-O-Matic ICE0320FW cuber head is just over 22 inches wide. The water-cooled unit does not require clearance on the sides for air intake and exhaust vents, since the water-cooled condenser does not require air circulation. Note that the water-cooled model does require a drain for the 157 gallons of water used to cool the condenser for each 100 pounds of ice produced. However, the space-saving 22-inch wide design would suit a location where available wall space is at a premium (minimum of 22 inches left to right). In addition, the Ice-O-Matic ICE0320FW utilizes Ice-O-Matic's Harvest Assist technology to shorten the ice making cycle and reduce electricity consumption.
The Ice-O-Matic B42PS storage bin is 22 inches wide and can hold up to 351 LB of ice at one time. The B42PS storage bin is a total of 50" high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B42PS with stainless steel exterior and an inner polyethylene liner separated by a layer of foam insulation. The molded plastic bin door flips up for easy access to ice. Ice-O-Matic has also included a built in ice scoop holder on the inner wall of the bin. A bin drain is located at the back of the Ice-O-Matic B42PS to allow any standing water from ice melt to drain out of the unit. You can utilize the same floor drain for both the storage bin and the water-cooled cuber head.
Together the Ice-O-Matic ICE0320FW mounted on the B42PS storage bin measure just over 73" high. Both units are 22" wide, so this ice machine and storage bin combo is ideal for locations where you have minimal space left to right and over head space is limited (just over 6 feet is required). Ice-O-Matic has also incorporated its PURE ICE technology into all ice making surfaces that come into contact with water or ice, providing built-in AgIon antimicrobial protection for both pieces of ice-making equipment. With a production rate of 349 LB per day and a storage capacity of 351 LB, the ICE0320FW-B42PS ice machine and storage bin combo allows you to make and store a moderate amount of ice so this equipment combo would be a good choice for a foodservice business with moderate ice requirements and limited space.
Ice-O-Matic ICE0320FW-B42PS 349 LB 22" Water-Cooled Full Cube Ice Machine w/ Storage Bin.
ICE Series Modular Cube Ice Maker, water-cooled, approximately 349 LB production/24 hours (Rated at 70 degrees F Air Temp / 50 degrees F Water), Full Size Cube, filter-free air, Stainless Steel and Molded Plastic Exterior, PURE ICE built in antimicrobial protection, Harvest assist produces Ice consistently/reduces operating cost, 115v/60/1-ph, 13.1 amps, UL, NSF, CE.
B42PS Bin Capacity 351 LB, Stainless Steel bin exterior, molded plastic bin door.
Starting at: $2,631.30 - In stock Brand:
ice0320fw_b42ps Product ID:
Ice-O-Matic ICE0320FW Features
ICE Series Modular Cube Ice Maker
Produces up to 349 LB Full Cube Ice / 24 hours
Cuber Head is just over 22" wide
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B42PS Features
Ice Storage Bin
351-LB Storage Capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation