The Ice-O-Matic ICE0320FW-CD40022 is a 22" water-cooled ice machine that is able to produce up to 349 lbs of ice a day combined with a 22" wide hotel ice dispenser. The full-size cube ice that the Ice-O-Matic ICE0320FW makes measures 7/8" x 7/8" x 7/8", making it ideal for beverages since it is larger and takes a bit longer to melt. Note that the Ice-O-Matic ICE0320FW requires a 115 volt electrical connection, a potable water line in, a water line in for cooling the condenser, and a drain for both the purged mineral-laden water from ice making AND the warm waste water that was used in cooling the condenser.
The Ice-O-Matic CD40022 hotel ice dispenser measures 54 inches tall. When planning your installation, note that the Ice-O-Matic CD40022 requires a 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain for any melted ice in the dispenser's bin (you can use the same drain for both the dispenser and the water-cooled cuber head). The Ice-O-Matic CD40022 can store up to 120 pounds of ice. The dispenser has a push activation feature, a large dispensing chute, and a wide ice-filling area so that the Ice-O-Matic CD40022 can accommodate most ice buckets. With Ice-O-Matic's Turbo Dispense technology, ice can be dispensed at an amazing speed of a 1/4 pound of ice per second.
Together the Ice-O-Matic ICE0320FW-CD40022 cuber head and hotel ice dispenser combo only measure just over 76" high with the head mounted on the dispenser. The Ice-O-Matic ICE0320FW makes a decent amount of full-sized cube ice per day (349 LB) and the CD40022's internal bin can store 120 pounds at a time, so you can anticipate always having ice on hand.
Ice-O-Matic ICE0320FW Features
344 LB Production/24 Hours
Full-sized Cube measures 7/8" x 7/8" x 7/8"
Cuber Head is just over 22" wide
Ice-O-Matic CD40022 Features
Vending Hotel Ice and Water Dispenser
Floor Model, Push Activated
120 LB Storage Capacity, 22" Wide
Ice-O-Matic Ice Machine and Dispenser Benefits
Pure Ice® Built In Antimicrobial Protection with AgIon compound incorporated into surfaces water and ice contact
Harvest Assist Provides Consistent Ice production
Durable Electro-less Nickel Plating On The Evaporator Plate
Construction from Corrosion-Resistant Stainless Steel & Fingerprint-proof Plastic
Power Clean Allows Access To The Bin For Easy Cleaning w/o Moving The Ice Machine
Turbo Dispense Dispenses 1/4 LB Of Ice Per Second