The Ice-O-Matic ICE0320HA is a Modular style ice machine that produces up to 334 pounds of Half-sized Cube ice every 24 hours. Ice-O-Matic's Half cube ice measures 7/8 inches by 7/8 inches by 3/8 inches and is ideal for beverages, dispensing applications, and blended drinks. The unit requires 115 volt, 60 Hz, 1-Phase power supply. The Ice-O-Matic ICE0320HA modular cuber head is just over 22 inches wide and requires mounting on another piece of equipment such as the Ice-O-Matic B42PS. Note that the Ice-O-Matic ICE0320HA has an air-cooled condenser. Air intake vents are in the rear of the unit and exhaust vents are on the right side when facing the unit. A minimum of 6 inches of clearance are required for proper air flow per the manufacturer. The space-saving 22-inch wide design also would suit a location where available wall space is at a premium (minimum of 28 inches left to right). The Ice-O-Matic ICE0320HA utilizes Ice-O-Matic's Harvest Assist technology to shorten the ice making cycle, thus reducing overall energy consumption.
The Ice-O-Matic B42PS storage bin has a capacity of 351 LB of ice and measures 22" wide. The B42PS bin is a total of 50" high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B42PS with a durable stainless steel exterior and an inner polyethylene liner separated by a layer of foam insulation. The Ice-O-Matic B42PS has a bin door made of molded plastic that flips up for easy access to ice. Ice-O-Matic has included a built in ice scoop holder on the inner wall of the bin. A bin drain is located at the back of the unit to prevent water from standing too long which could allow bacteria, etc. to grow.
Together the Ice-O-Matic ICE0320HA mounted on the B42PS storage bin measure under 74" high. Both units are 22" wide (plus 6" for air vent clearance), so this ice machine and storage bin combo can be installed in locations where you have minimal space left to right (28" minimum) and overhead space (just over 6 feet is required). Ice-O-Matic's PURE ICE technology means that all surfaces that come into contact with water or ice in both pieces of equipment have built-in AgIon antimicrobial protection. The Ice-O-Matic ICE0320HA-B42PS would be a good choice for a foodservice business with moderate ice requirements, with its production rate of 334 LB per day and a storage capacity of 351 LB.
Ice-O-Matic ICE0320HA-B42PS 334 LB 22" Air-Cooled Half Cube Ice Machine w/ Storage Bin.
ICE Series Ice Maker, Produces Half Cube Style Ice, 334 LB production/24 hours. Has self-contained, air-cooled condenser. 22.34 inches wide, 23.18 inches high. 115 Volts, 60Hz, 1-phase, 13.2 amps. Includes 22-inch wide Modular Ice Storage Bin with 351 pound storage capacity.
Starting at: $3,050.00 - In stock Brand:
ice0320ha-b42ps Product ID:
Ice-O-Matic ICE0320HA Features
ICE Series Modular Cube Ice Maker
Cuber Head is just over 22" wide
Produces up to 334 LB Half Cube Ice / 24 hours
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B42PS Features
Ice Storage Bin
351-lbs. Storage Capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation