The Ice-O-Matic ICE0400FA-B55PS is a 30" wide, air-cooled modular ice machine combined with an ice storage bin. The ICE0400FA has a production rate of up to 505 pounds of full cube ice in a 24 hour period. The cuber head unit cabinet is only 20" high. Since the Ice-O-Matic ICE0400FA is an air-cooled model, it does require a minimum of 6" of air vent circulation clearance on the right side and the back. The full-sized cube ice produced by the Ice-O-Matic ICE0400FA measures 7/8" wide x 7/8" deep x 7/8" high. Full-sized cubes take longer to melt due to their size, and so are often used for retail beverages (less dilution of the drink) or for bagging ice (fewer frozen clumps). The Ice-O-Matic ICE0400FA is easy to install since it only requires a 115 volt electrical connection, a water line in, and a drain for the mineral-laden water that didn't freeze at the end of each ice-making cycle. In addition, Ice-O-Matic uses its Harvest-Assist technology in the ICE0400FA to more quickly remove ice from the evaporator surface, saving time and electricity every ice-making cycle.
The Ice-O-Matic B55PS storage bin is also 30" wide and it can hold up to 510 LB of ice. The storage bin is a total of 50" high, including the adjustable 6" legs. Ice-O-Matic has designed the B55PS with a stainless steel exterior and a polyethylene bin liner with a layer of foam insulation between. The bin door is made from molded plastic and flips up for easy access to your ice. A bin drain is located at the back of the B55PS to remove any standing water.
The Ice-O-Matic ICE0400FA-B55PS equipment combo is constructed from corrosion resistant stainless steel and fingerprint proof plastic making it a durable choice. With the low profile ICE0400FA cuber head sitting on top of the B55PS bin, the total height of the equipment combination is only 70" high. With these dimensions, the Ice-O-Matic ICE0400FA-B40PS cuber head and bin combo is ideal for locations with a moderate daily ice requirement and space restrictions due to ceiling clearance.
Ice-O-Matic ICE0400FA Features
ICE Series Modular Cube Ice Machine
Up to 505 LB ice production / 24 hours
Full Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B55PS Features
Ice Storage Bin
Up to 510 LB ice storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation