The Ice-O-Matic ICE0400FA-CD40030 is an air-cooled modular ice machine combined with a hotel ice dispenser. The equipment combination comes as two separate equipment pieces and is designed for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0400FA cuber head has a production rate of up to 505 pounds of full cube ice in a 24 hour period. The cuber head's cabinet is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0400FA is an air-cooled model, and therefore requires a minimum of 6" of air vent clearance on the right side and at the back of the unit. The full-sized cube ice produced by the Ice-O-Matic ICE0400FA measures 7/8" x 7/8" x 7/8". Since Full-sized cubes are larger, they take longer to melt and are therefore often used for retail beverages or for bagging ice. The Ice-O-Matic ICE0400FA requires a 115 volt electrical connection, a potable water line in, and a drain for any mineral-laden water that didn't freeze at the end of each ice-making cycle. Ice-O-Matic has also included its Harvest-Assist technology in the ICE0400FA to more quickly remove ice from the evaporator surface, which means each ice-making cycle is shorter, saving you time and electricity.
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30 inch wide hotel ice dispenser with its own built-in storage bin. The dispenser unit stands at 54 inches tall by itself. The 30-inch wide ICE0400FA cuber head would fit on top. The Ice-O-Matic CD40030 takes up very little wall space, allowing convenient ice-dispensing in a narrow vending alcove or other location with minimal space. The Ice-O-Matic CD40030 can store up to 180 pounds of ice at any one time. The push activation feature, large dispensing chute, and wide ice filling area means that the Ice-O-Matic CD40030 can accommodate nearly any size ice bucket that your customers or employees may use. In addition, Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a speed of 1/4 pound of ice per second, so there is no waiting for ice. Ice-O-Matic has also considered the effects of heavy customer use, so the CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof. When planning your installation, note that the Ice-O-Matic CD40030 also requires 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain for water from ice that may have melted in the built in bin (you can use the same drain for both the ICE0400FA cuber head and the ice dispenser).
Together the ICE0400FA and the CD40030 equipment combination stands 74 inches high. Both units are 30 inches wide and they stack comfortably and flush. With these dimensions, the 505 LB daily ice production rate and the 180 LB bin capacity, the ICE0400FA-CD40030 combo makes an ideal choice for a hotel or business with moderate ice requirements and limited wall space.
Ice-O-Matic ICE0400FA Features
ICE Series Modular Cube Ice Machine
Up to 505 LB ice production / 24 hours
Full Cube style ice
30" Wide, 20" High - Low Profile Model
115v/60/1-ph, 17.1 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps