The Ice-O-Matic ICE0400HW-CD40030 is a water-cooled modular ice machine combined with a hotel ice dispenser. The equipment combination comes as two separate equipment pieces and is designed for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0400HW cuber head has a production rate of up to 496 pounds of half cube ice in a 24 hour period. This works out to just under 21 pounds of ice per hour being dropped into the CD40030 dispenser's bin. The ICE0400HW cuber head is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0400HW is a water-cooled model, and therefore will use a large volume of water each day. In addition to the 28.8 gallons of water used to make 100 pounds of ice, there is also the 148 gallons of water used to circulate around the condenser to cool it. This water transfers the heat from the condenser and is considered waste water which gets flushed at the end of the ice-making cycle. Therefore, the Ice-O-Matic ICE0400HW will require a drain for the nearly 600 gallons of waste water per day (if the ice machine produces to its full capacity). However, Ice-O-Matic has also included its Harvest-Assist technology to more quickly remove ice from the evaporator, which means each ice-making cycle is shorter. So the model produces the same amount of ice in a shorter time, saving electricity on each cycle. With a water-cooled condenser, there is also no need for cooling fans, providing an additional reduction in electrical consumption. An added benefit is that no hot air is discharged into the surrounding area.
The half cube ice produced by the Ice-O-Matic ICE0400HW measures 7/8" x 7/8" x 3/8". With half cubes, you have a greater liquid displacement per glass, since you can fit more cubes per glass. For a retailer, this means less beverage per serving, saving money. Half cubes are also ideal for dispensing applications, since the smaller cube is less likely to get jammed in the dispenser. Note that the Ice-O-Matic ICE0400HW does require a 115-volt electrical connection, a potable water line in, a second water line in for cooling the condenser, and a drain for both the leftover water that didn't freeze at the end of each ice-making cycle and the purged condenser waste water.
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30 inch wide hotel ice dispenser with a built-in storage bin which can store up to 180 pounds of ice. The dispenser unit stands at 54 inches tall. The 30-inch wide, 20-inch tall ICE0400HW cuber head would fit on top. The Ice-O-Matic CD40030 is small enough to fit in a compact vending alcove. The Ice-O-Matic CD40030 includes push activation dispensing, a large dispensing chute, and a wide ice filling station that can fit most ice buckets. The Turbo Dispense technology allows dispensing at a speed of a 1/4 pound of ice per second. For the business with high customer self-service traffic, the CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof. Like the ICE0400HW cuber head, the Ice-O-Matic CD40030 requires a 115-Volt, 60Hz, 1-Phase electrical power source. The dispenser's installation location also requires a drain for water from ice that may have melted in the dispenser's bin (you can use the same drain for both the ICE0400FW and the ice dispenser).
The ICE0400HW and the CD40030 equipment combination stands 74 inches high. Both units are 30 inches wide and fit together as if one unit. The ICE0400HW-CD40030 equipment combo, with its compact physical dimensions, the 496 LB daily ice production rate and the 180 LB bin capacity, would work well for a business with limited space and moderate daily ice requirements.
Ice-O-Matic ICE0400HW-CD40030 496 LB 30" Water-Cooled Ice Machine w/ CD40030 Hotel Dispenser.
Cube Ice Maker 30" wide, water-cooled approx 496 LB production /24 hours (Rated at 70deg.F Air / 50deg.F Water), half size cube, antimicrobial protection.
Vending Ice Dispenser, Push activation, 30" Wide, 54" High, floor model, 180 LB capacity storage.
Starting at: $4,503.45 - In stock Brand:
ice0400hw_cd40030 Product ID:
Ice-O-Matic ICE0400HW Features
ICE Series Modular Cube Ice Machine
Up to 496 LB ice production / 24 hours
Half Cube style ice
30" Wide, 20" High - Low Profile Model
115v/60/1-ph, 12.9 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps