The Ice-O-Matic ICE0400HW-CD40130 is a modular ice machine combined with a hotel ice dispenser. The equipment combination comes as two separate equipment pieces and is designed for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0400HW water-cooled ice machine has a production rate of up to 496 pounds of half cube ice in a 24-hour period. The cuber head cabinet is 30 inches wide and only 20 inches high. Since the Ice-O-Matic ICE0400HW is a water-cooled model, it uses a significant amount of water, including 28.8 gallons of water to make 100 pounds of ice and an additional 148 gallons of water used to cool the condenser while making that 100 pounds of ice. All of the water used to cool the condenser is flushed at the end of the ice-making cycle. Therefore, a drain is required for the ICE0400HW's large volume of daily waste water (nearly 600 gallons per day if the ice machine produces to its full capacity). In contrast, the ICE0400FW's electrical consumption is lower than a comparable air-cooled model because, there are no cooling fans running with a water-cooled condenser. Another benefit of the water-cooled ICE0400HW is that no hot air is discharged into the surrounding area. For installation, the Ice-O-Matic ICE0400HW does require a 115-volt electrical connection, a potable water line in, a second water line in for cooling the condenser, and a drain for both the purged water that didn't freeze at the end of each ice-making cycle and the condenser's waste water.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice dispenser with a built-in 180 pound capacity storage bin. An added feature of the CD40130 model is a factory-installed water dispenser. Note that the water dispenser will require an additional potable water line. The Ice-O-Matic CD40130 dispenser unit alone is 54 inches tall. The Ice-O-Matic CD40130 takes up minimal space, and will fit in compact spaces. The Ice-O-Matic CD40130 has a push activation feature, a large ice dispensing chute, and a wide ice filling area. In addition, Ice-O-Matic's Turbo Dispense technology allows ice to be dispensed at a speed of a 1/4 pound of ice per second. Note that the Ice-O-Matic CD40130 requires a 115-Volt, 60Hz, 1-Phase electrical power source. The dispenser's bin also requires a drain for any ice that has melted (you can use the same external drain for both the ICE0400HW cuber head and the ice dispenser).
Together the ICE0400FW and the CD40130 equipment combination is 30 inches wide and stands 74 inches high which makes it a good choice for businesses with limited space for installation. The ICE0400FW-CD40130 equipment combo has a 496 LB daily ice production rate, an efficient ice and water dispenser, and a 180 LB bin capacity, so your customers or employees will have a one-stop destination for both water and ice.
Ice-O-Matic ICE0400HW Features
ICE Series Modular Cube Ice Machine
Up to 496 LB ice production / 24 hours
Half Cube style ice
30" Wide, 20" High - Low Profile Model
115v/60/1-ph, 12.9 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Includes Factory-installed Water-Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps