The Ice-O-Matic ICE0406FA-CD40130 is an air-cooled modular ice machine combined with a hotel ice and water dispenser. The equipment combination comes as two separate equipment pieces and is designed for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0406FA cuber head has a production rate of up to 529 pounds of full cube ice in a 24 hour period, which works out to 22 pounds of ice every hour. The cuber head's cabinet is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0406FA is an air-cooled model. The condenser is cooled by electric fans and vents are located on the right side and at the back of the unit. The ICE0406FA therefore requires a minimum of 6" clearance on the right side and at the back of the unit. The Ice-O-Matic ICE0406FA makes full cube ice, which measures 7/8" x 7/8" x 7/8". Since Full-sized cubes are larger, they last longer, meaning less dilution of your beverages. Note that the Ice-O-Matic ICE0406FA requires a 208-230 volt electrical connection. It also needs a potable water line in, and a drain for purge water from each ice-making cycle. Ice-O-Matic has also included its Harvest-Assist technology in the ICE0406FA to remove ice from the evaporator surface more quickly, which makes each ice-making cycle shorter, saving electricity over the life of the unit.
The Ice-O-Matic CD40130 Hotel Ice and Water Dispenser is a 30-inch wide hotel dispenser with a built-in 180-pound capacity storage bin. The dispenser unit stands at 54 inches tall. In addition to dispensing ice, the Ice-O-Matic CD40130 also has a factory installed water dispenser. This means that the hotel dispenser will require its own incoming potable water line. The CD40130 can be installed in narrow spaces with low ceilings. The ice dispenser has a push activation feature, a large ice dispensing chute, and a wide ice filling area. The Ice-O-Matic CD40130 also utilizes Ice-O-Matic's Turbo Dispense technology, which means that ice can be dispensed at a speed of 1/4 pound of ice per second. Note that for installation, the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source (the ICE0406FA cuber head requires 208-230 volts). The installation location also requires an external bin drain for water (you can use the same drain for both the ICE0406FA cuber head and the ice dispenser).
When fitted together, the Ice-O-Matic ICE0406FA and the CD40130 equipment combination stands 74 inches high. With its ice production rate, bin capacity and these physical dimensions, the ICE0406FA-CD40130 equipment combo would be a good selection for a business location with moderate daily ice requirements and limited wall space for installation.
Ice-O-Matic ICE0406FA Features
ICE Series Modular Cube Ice Machine
529 LB ice production / 24 hours
Full Cube style ice
30" Wide, 20" High - Low Profile Model
208-230v/60/1-ph, 8.0 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40130 Features
Vending Hotel Ice and Water Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps