The Ice-O-Matic ICE0406FW-CD40130 is a water-cooled modular ice machine combined with a hotel ice dispenser. The equipment combination comes as two separate pieces with the intention that the ice machine cuber head is to be mounted on the hotel dispenser.
The Ice-O-Matic ICE0406FW cuber head has a production rate of up to 523 pounds of full cube ice every 24 hours, which is 22 pounds of ice every hour dropping into the dispenser. The ICE0406FW's cabinet is 30 inches wide and only 20 inches high. Because the Ice-O-Matic ICE0406FW is a water-cooled model, there is a significant amount of water used and then drained (up to 132 gallons of water cools the condenser for every 100 pounds of ice produced).
The Ice-O-Matic ICE0406FW produces full cube style ice, which measures 7/8" x 7/8" x 7/8". Since Full-sized cubes are larger, they work well for "on-the-rocks" beverages, with little beverage dilution. For proper installation, the Ice-O-Matic ICE0406FW requires a 208-230 volt electrical connection. It also needs an incoming water line for ice making, a second incoming water line for cooling the condenser, and an external drain for all of the waste water released at the end of each ice-making cycle. In contrast with the amount of water used, Ice-O-Matic has incorporated electricity saving features, such as their Harvest-Assist technology. Harvest Assist removes ice from the evaporator more quickly, which means each ice-making cycle is shorter, saving you time and electricity over the life of the ice machine.
The Ice-O-Matic CD40130 Hotel Ice and Water Dispenser is 30-inches wide and has a 180-pound capacity storage bin. The dispenser unit is 54 inches in height. Note that in addition to dispensing ice, the Ice-O-Matic CD40130 also has a factory installed water dispenser, which is very popular. This does mean that the hotel dispenser will require its own incoming potable water line. Because of its physical size, the CD40130 can be installed in narrow spaces with low ceilings. The ice dispenser has a push activation feature, a large ice dispensing chute, and a wide ice filling area. The Ice-O-Matic CD40130 also utilizes the manufacturer's Turbo Dispense technology. Turbo Dispense enables the unit to dispense ice at a speed of 1/4 pound of ice per second. Note that for installation, the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source (the ICE0406FW cuber head requires 208-230 volts). The installation location also requires an external bin drain for the high volume of waste water (you can use the same drain for both the ICE0406FW cuber head and the ice dispenser).
The ICE0406FW and the CD40130 equipment combination stands 74 inches high. With these dimensions, plus the 523 LB daily ice production rate and the 180 LB bin capacity, the ICE0406FW-CD40130 equipment combo makes a great choice for a business with moderate ice requirements and limited installation space. This convenient combo becomes a one-stop destination for both water and ice.
Ice-O-Matic ICE0406FW Features
ICE Series Modular Cube Ice Machine
523 LB ice production / 24 hours
Full Cube style ice
30" Wide, 20" High - Low Profile Model
208-230v/60/1-ph, 6.4 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40130 Features
Vending Hotel Ice and Water Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps