The Ice-O-Matic ICE0406HA-CD40030 is an air-cooled modular cuber head combined with a freestanding hotel ice dispenser. The equipment combination comes as two separate pieces, but is designed for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0406HA ice machine can produce up to 529 pounds of half-sized cube ice in a 24-hour period. The ICE0406HA's cabinet is 30 inches wide and is considered a Low Profile model since it is only 20 inches high. The Ice-O-Matic ICE0406HA is an air-cooled model, which means that a minimum of 6" of air vent clearance on the right side and at the back of the cabinet is required. The Ice-O-Matic ICE0406HA produces half cube ice, which measures 7/8" x 7/8" x 3/8". Half cube ice is often used for dispensing applications because the smaller cube size means fewer dispenser jams. In addition, retailers serving beverages appreciate that you can fit more half cubes of ice in each glass (which means less beverage per serving). The Ice-O-Matic ICE0406HA requires a 208-230 volt electrical connection, a potable water line in, and an external drain for any water that didn't freeze at the end of each ice-making cycle. With the intent of saving time and money, Ice-O-Matic has also included its Harvest-Assist technology in the ICE0406HA. Harvest assist helps to remove ice more quickly from the evaporator surface, shortening the ice-making cycle.
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30-inch wide freestanding ice dispenser with an internal storage bin. The CD40030 dispenser unit by itself stands at 54 inches tall. Therefore, the dispenser takes up very little wall space, which allows installation in narrow locations with lower ceilings. Note that the Ice-O-Matic CD40030's bin can store up to 180 pounds of ice at one time. The CD40030 has a push activation feature, a large dispensing chute, and a wide ice filling area. In addition, Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a steady speed of 1/4 pound of ice per second. Ice-O-Matic has included these features to allow your customers or employees to quickly dispense ice to meet their needs. The Ice-O-Matic CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof for businesses with heavy ice dispensing traffic. Note that the Ice-O-Matic CD40030 requires a 115 Volt, 60Hz, 1-Phase electrical power source (the cuber head requires 208-230 volts). The installation location also requires an external drain for water at the bottom of the bin (you can use the same external drain for both the cuber head and the ice dispenser).
The ICE0406HA cuber head and the CD40030 hotel ice dispenser are to be combined with the head on the dispenser. The equipment combination stands 74 inches high. Both units are 30 inches wide. With these dimensions, the 529 LB daily ice production rate and the dispenser's 180 LB bin capacity, the ICE0406HA-CD40030 equipment combo makes sense for a business with limited space and moderate ice requirements.
Ice-O-Matic ICE0406HA Features
ICE Series Modular Cube Ice Machine
529 LB ice production / 24 hours
Half Cube style ice
30" Wide, 20" High - Low Profile Model
208-230v/60/1-ph, 8.0 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps