The Ice-O-Matic ICE0406HA-CD40130 is an air-cooled modular ice machine combined with a freestanding hotel ice and water dispenser. The equipment combination comes as two separate pieces, but is intended for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0406HA's cabinet is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0406HA is an air-cooled model, utilizing electric fans to circulate surrounding air through the unit. This means that a minimum of 6" of air vent clearance on the right side and at the back of the cabinet is required, per the manufacturer. The Ice-O-Matic ICE0406HA ice machine can produce up to 529 pounds of Half Cube ice in a 24-hour period. Half Cube ice, which measures 7/8" x 7/8" x 3/8", is often used for dispensing applications because the smaller cube size means fewer dispenser jams. In addition, because you can fit more of the smaller half cubes in each glass, retailers serving beverages appreciate the higher liquid displacement (which means less beverage per serving). The Ice-O-Matic ICE0406HA requires a 208-230 volt electrical connection and a potable water line in. The ICE406HA also needs an external drain for any water leftover at the end of each ice-making cycle. Ice-O-Matic has also included its Harvest-Assist technology in the ICE0406HA, which helps to remove ice more quickly from the evaporator surface, shortening the ice-making cycle and saving money on electricity over time.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide freestanding dispenser with an internal storage bin. The CD40130 dispenser unit by itself stands at 54 inches tall. Besides dispensing ice, the CD40130 also has a factory-installed water dispenser. Therefore, an incoming water line for the water dispenser is required. Note that the Ice-O-Matic CD40130's bin can store up to 180 pounds of ice at one time. The CD40130 has a push activation feature, a large dispensing chute, and a wide ice filling area. In addition, Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a steady speed of 1/4 pound of ice per second. The Ice-O-Matic CD40130 hotel ice dispenser's exterior is smudge and fingerprint proof for businesses with heavy ice dispensing traffic. With these features, the CD40130 ice and water dispenser can be your customer's one-stop destination for refreshment. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source (the cuber head requires 208-230 volts). The dispenser's installation location also requires an external drain for melted ice in the bin (you can use the same external drain for both the cuber head and the ice dispenser).
The ICE0406HA cuber head and the CD40130 hotel ice dispenser are designed to be installed with the cuber head on the dispenser. When configured properly, the equipment stands 74 inches high. Both units are 30 inches wide. With these physical dimensions, the 529 LB daily ice production rate and the dispenser's 180 LB bin capacity, the ICE0406HA-CD40130 equipment combo would be a good choice if you have limited installation space and moderate ice requirements.
Ice-O-Matic ICE0406HA Features
ICE Series Modular Cube Ice Machine
529 LB ice production / 24 hours
Half Cube style ice
30" Wide, 20" High - Low Profile Model
208-230v/60/1-ph, 8.0 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40130 Features
Vending Hotel Ice and Water Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps