The Ice-O-Matic ICE0406HW-CD40030 is a water-cooled modular cuber head combined with a freestanding hotel ice dispenser. The equipment combination comes as two separate pieces, but is designed for the ice machine cuber head to be mounted on the ice dispenser.
The Ice-O-Matic ICE0406HW ice machine can produce up to 523 pounds of half-sized cube ice in a 24-hour period. The ICE0406HW's cabinet is 30 inches wide and is considered a Low Profile model since it is only 20 inches high. The Ice-O-Matic ICE0406HW is a water-cooled ice machine and therefore requires a significant amount of water to circulate through the unit to cool the condenser. This water becomes waste-water and must be flushed from the system (up to 132 gallons of water for every 100 pounds of ice produced).
The Ice-O-Matic ICE0406HW produces half cube ice, which measures 7/8" x 7/8" x 3/8". Half cube ice is often used for dispensing applications because the smaller cubes are less likely to jam the dispenser mechanism. In addition, if your business provides beverages to your customers or employees, you will be able to fit more half cubes per glass (meaning less beverage per serving). Note: the Ice-O-Matic ICE0406HW requires a 208-230 volt electrical connection. It also requires a potable water line in, a second line in for cooling the condenser, and an external drain for any purge water from both ice-making and cooling the condenser. Ice-O-Matic has also included its Harvest-Assist technology in the ICE0406HW to help remove ice more quickly from the evaporator surface,. Harvest assist shortens the ice-making cycle, saving time and electricity each ice-making cycle..
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30-inch wide freestanding ice dispenser with a built-in storage bin. The CD40030 dispenser unit by itself stands at 54 inches tall. Therefore, the dispenser takes up very little wall space, which allows installation in narrow locations with lower ceilings. The Ice-O-Matic CD40030's bin can store up to 180 pounds of ice at one time. The dispenser has a push activation feature, a large dispensing chute, and a wide ice filling area. In addition, Ice-O-Matic's has included its Turbo Dispense technology so that ice is dispensed at a steady speed of 1/4 pound of ice per second. Ice-O-Matic has included these features to allow your customers or employees to quickly dispense ice to meet their needs. The Ice-O-Matic CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof for businesses with heavy ice dispenser use. Note that the Ice-O-Matic CD40030 requires a 115 Volt, 60Hz, 1-Phase electrical power source (the cuber head requires 208-230 volts). The CD40030 also requires an external drain for water leftover at the bottom of the bin (you can use the same external drain for both the cuber head and the ice dispenser).
The ICE0406HW cuber head and the CD40030 hotel ice dispenser are to be combined with the head on the dispenser. Together, the two pieces combined stand 74 inches high. Both units are 30 inches wide. With these dimensions, and the 523 pounds of daily ice production rate and the dispenser's 180 pound bin capacity, the ICE0406HW-CD40030 equipment combo would be an ideal purchase for a location with limited space and moderate ice requirements.
Ice-O-Matic ICE0406HW Features
ICE Series Modular Cube Ice Machine
523 LB ice production / 24 hours
Half Cube style ice
30" Wide, 20" High - Low Profile Model
208-230v/60/1-ph, 6.4 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps