The Ice-O-Matic ICE0406HW-CD40130 is an equipment combination that includes a water-cooled modular ice machine and a hotel ice dispenser. The equipment combination comes as two separate pieces and is designed so that the ice machine cuber head is to be mounted on the hotel dispenser.
The Ice-O-Matic ICE0406HW cuber head has an ice production rate of up to 523 pounds of half cubes every 24 hours. This means that you receive 22 pounds of ice every hour dropping into the dispenser. The ICE0406HW's cabinet measures 30 inches wide and only 20 inches high. Since the model is water-cooled, no extra clearance for air intake and exhaust vents is needed. Therefore the unit is space efficient. Note however, that the Ice-O-Matic ICE0406HW is a water-cooled model, and a high volume of water is circulated through the condenser system and then drained (up to 132 gallons of water cools the condenser for every 100 pounds of ice produced - up to 686 gallons of water per day flushed down).
The ICE0406FW produces half cube style ice, which measures 3/8" x 7/8" x 7/8". Half cube ice is often used for dispensing applications because the smaller cubes are less likely to jam the dispenser. In addition, if your business provides beverages to your customers or employees, you will be able to fit more half cubes per glass (meaning less beverage per serving, saving you money). Note that for proper installation, the Ice-O-Matic ICE0406HW requires a 208-230 volt electrical connection. This water-cooled model also needs two incoming water lines - one for ice making, and a second line for cooling the condenser. It also requires an external drain for all of the waste water released at the end of each ice-making cycle. To offset water usage, Ice-O-Matic has incorporated electricity saving features, such as their Harvest-Assist technology. Harvest Assist dislodges ice from the evaporator plate more quickly, which means each ice-making cycle is shorter and uses less electricity.
The Ice-O-Matic CD40130 Hotel Ice and Water Dispenser is 30-inches wide and has a 180-pound capacity storage bin. The freestanding dispenser unit is 54 inches in height. The Ice-O-Matic CD40130 has a factory installed water dispenser, which enhances the attraction of this ice dispenser model. Note however, that this means that the hotel dispenser will require an additional incoming potable water line. The CD40130 ice dispenser has a push activation feature, a large ice dispensing chute, and a wide ice filling area. The Ice-O-Matic CD40130 also utilizes Turbo Dispense technology. Ice-O-Matic's Turbo Dispense enables the unit to dispense ice at a speed of 1/4 pound of ice per second. Note that for installation, the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source (the ICE0406HW ice machine requires 208-230 volts). The installation location also requires an external drain for the large amount of waste water (you can use the same drain for both the ICE0406HW cuber head and the ice dispenser).
The ICE0406HW and the CD40130 equipment combination stands 74 inches high with the cuber mounted on the hotel dispenser. The ICE0406HW-CD40130 equipment combo makes a great choice for a business with moderate ice requirements and limited installation space and with the additional water dispensing feature, this convenient combo is a one-stop destination for both water and ice.
Ice-O-Matic ICE0406HW Features
ICE Series Modular Cube Ice Machine
523 LB ice production / 24 hours
Half Cube style ice
30" Wide, 20" High - Low Profile Model
208-230v/60/1-ph, 6.4 amps
Harvest Assist Provides Consistent Ice production
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On Evaporator Plate Ensures Reliability
Ice-O-Matic CD40130 Features
Vending Hotel Ice and Water Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps