The Ice-O-Matic ICE0500FA-B55PS is a 30" wide air-cooled ice maker combined with an ice storage bin. The equipment combo includes two separate pieces designed to be configured with the ice cuber head mounted on the storage bin.
The ICE0500FA ice machine's cabinet is only 20" high and is considered a low profile unit. Since the Ice-O-Matic ICE0500FA is an air-cooled unit, it requires a minimum of 6" of air vent clearance on the right side and the back for proper air circulation. The ice machine has a production rate of up to 565 pounds of full cube ice in a 24-hour period. Since full-sized cube ice the Ice-O-Matic ICE0500FA produces measures 7/8" wide x 7/8" deep x 7/8" high, it takes a longer time to melt. For this reason, the larger, full-sized cubes are often used for "on-the-rocks" beverages or for retail ice bagging applications. Note that the Ice-O-Matic ICE0500FA requires a 115 volt electrical connection, plus a potable incoming water line. It also needs an external water drain for any water purged at the end of each ice-making cycle. The ice machine only uses 19 gallons of water for every 100 pounds of ice it makes. In addition, the Ice-O-Matic ICE0500FA uses Harvest-Assist technology, allowing quicker removal of ice from the evaporator surface. This saves you both time and electricity every ice-making cycle, helping the ICE0500FA to earn an ENERGY STAR rating.
The Ice-O-Matic B55PS storage bin is 30" wide and a total of 50" high, including the adjustable 6" legs. The bin can hold up to 510 pounds of ice. Ice-O-Matic has designed the B55PS with a stainless steel exterior and a polyethylene bin liner. A layer of foam insulation has been injected in between the inner and outer bin walls. The bin door on the front is made from plastic and flips up for easy access to the ice. Note: A bin drain is located at the back of the B55PS to remove any standing water.
The Ice-O-Matic ICE0500FA-B55PS equipment combo is constructed from corrosion resistant stainless steel and fingerprint proof plastic, making it a durable choice. With the 20" high ICE0500FA cuber head mounted on top of the B55PS bin, the total height of the equipment combination is only 70" high. With these external dimensions, the Ice-O-Matic ICE0500FA-B55PS cuber head and bin combo would be a good fit for businesses with a moderate daily ice requirement and space restrictions.
Ice-O-Matic ICE0500FA-B55PS 565 LB 30" Air-Cooled Full Cube Ice Machine w/ Storage Bin.
ICE Series Ice Maker, Produces Full Cube Style Ice, 565 LB production/24 hours. Has self-contained, air-cooled condenser. 30 inches wide, 20 inches high. 115 Volts, 60Hz, 1-phase, 19.0 amps. ENERGY STAR Certified. Includes 30-inch wide Modular Ice Storage Bin with 510 pound storage capacity.
Starting at: $3,004.04 - In stock Brand:
ice0500fa-b55ps Product ID:
ICE Series Modular Cube Ice Machine
Up to 565 LB ice production / 24 hours
Full Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
ENERGY STAR Qualified
Ice-O-Matic B55PS Features
Ice Storage Bin
Up to 510 LB ice storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation