The Ice-O-Matic ICE0520FA-B42PS is a 22-inch, modular ice machine combined with an ice storage bin. The pieces of this equipment combination are designed to fit together, with the cuber head mounted on the storage bin.
The Ice-O-Matic ICE0520FA is a cuber head that produces up to 520 pounds of Full-sized Cube ice every 24 hours. Ice-O-Matic's full cube ice measures 7/8 inches by 7/8 inches by 7/8 inches. Because of their larger size, the full cubes take longer to melt and therefore cool beverages with less dilution. The Ice-O-Matic ICE0520FA ice machine is just over 22 inches wide and has an air-cooled condenser. Air intake vents are in the rear of the unit and exhaust vents are on the right side. Per the manufacturer, a minimum of 6 inches of vent clearance are required for proper air flow. The space-saving 22-inch wide design also would suit a location with limited wall space (model needs a minimum of 28 inches left to right). The Ice-O-Matic ICE0520FA does utilize the manufacturer's Harvest Assist technology to remove ice more quickly from the evaporator plate. This shortens the ice making cycle and reduces energy consumption over time.
The Ice-O-Matic B42PS storage bin is 22 inches wide and can hold 351 LB of ice at one time (approximately 16 hours of the ICE0520FA's ice production). The ice bin measures 50" high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B42PS with a stainless steel exterior, an inner polyethylene liner, with a layer of foam insulation between. The bin door flips up for easy access to ice. Ice-O-Matic has also included a built-in ice-scoop-holder on the inner wall of the bin. A bin drain is located at the back of the unit to allow melted ice to be regularly removed.
Together the Ice-O-Matic ICE0520FA mounted on the B42PS storage bin stand just over 73" high. Both units are 22" wide (don't forget an extra 6" for air vent clearance), so this ice machine and storage bin combo is ideal for locations where you have minimal space (28" minimum left to right and just over 6 feet floor to ceiling). Ice-O-Matic has also incorporated its PURE ICE technology with built-in AgIon antimicrobial protection into all ice making surfaces that come into contact with water or ice. With a production rate of 520 LB per day and a storage capacity of 351 LB, this Ice-O-Matic ICE0520FA-B42PS equipment combo allows you to make and store a moderate amount of ice.
Ice-O-Matic ICE0520FA Features
ICE Series Modular Cube Ice Maker
Produces up to 520 LB Full Cube Ice / 24 hours
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B42PS Features
Ice Storage Bin
351 LB Storage Capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation