The Ice-O-Matic ICE0606FA-B55PS is a 30" wide ice machine cuber head with a production rate of up to 650 pounds of full cube ice in a 24-hour period combined with an ice storage bin. The equipment combo requires the ICE0606FA cuber head to be mounted on the B55PS storage bin.
The cuber head cabinet is only 20" high and 30" wide. Note that since the Ice-O-Matic ICE0606FA is an air-cooled unit, it does require a minimum of 6" of air vent clearance on the right side and the back for proper functioning. The full-sized cube ice the Ice-O-Matic ICE0606FA produces takes a longer time to melt, since full cube ice measures 7/8" wide x 7/8" deep x 7/8" high. These larger, full-sized cubes are often used for retail "on-the-rocks" beverages or for retail ice bagging applications.
When considering installing this ice machine, note that the Ice-O-Matic ICE0606FA requires a 208-230 volt electrical connection, plus a potable incoming water line. The cuber head also needs an external drain for mineral-laden water that is flushed at the end of each ice-making cycle. Ice-O-Matic has also included their Harvest-Assist technology, which allows for quicker removal of ice from the evaporator plate. This Harvest-Assist saves both time and electricity each ice-making cycle and over the life of the Ice-O-Matic ICE0606FA. The electrical efficiencies help the ICE0606FA cuber head earn an ENERGY STAR qualified rating.
The Ice-O-Matic B55PS storage bin is 30" wide and a total of 50" high, with the 6" legs attached. The bin can hold up to 510 pounds of ice. Ice-O-Matic has designed the B55PS with a stainless steel exterior and a polyethylene bin liner with an injected foam insulation layer between the walls. The bin door on the front is made from plastic and flips up for easy access to the ice. Note: A bin drain is located at the back of the B55PS to allow the regular removal of any water from melted ice.
The Ice-O-Matic ICE0606FA-B55PS equipment combo is only 70" high when properly configured. With these external dimensions, the Ice-O-Matic ICE0606FA-B55PS cuber head and bin combo would be a smart choice for businesses with a moderate daily ice requirement and limits on the space where they can install the equipment.
ICE Series Modular Cube Ice Machine
Up to 650 LB ice production / 24 hours
Full Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.7 amps
ENERGY STAR Qualified
Ice-O-Matic B55PS Features
Ice Storage Bin
Up to 510 LB ice storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation