The Ice-O-Matic ICE0606FT is an ENERGY STAR qualified ice machine cuber head that can produce up to 650 pounds of full ice cubes in a 24 hour period under ideal conditions. The ideal temperatures for your ice machine to operate are 50° water and 70° air. It measures 30 inches wide, and it will require being mounted on a bin, a beverage dispenser, or an ice dispenser of equal width or on a larger width bin with an appropriate bin top adapter. Ice-O-Matic has designed this model with a top air discharge vent instead of a side discharge vent. This means that the Ice-O-Matic ICE0606FT does not require additional side clearances and so it can easily be installed between other equipment or in narrow spaces. The ICE0606FT is ideal for smaller establishments with moderate daily ice requirements. Note that the ICE0606FT needs a 6" top clearance for the proper venting of hot air.
Ice-O-Matic has incorporated its antimicrobial compound called AgIon to reduce the growth of bacteria, slime, and fungus on internal surfaces that come into contact with water or ice. The full cube ice produced by the Ice-O-Matic ICE0606FT works well in mixed drinks, soft drinks, and other retail beverages. Full Cube ice measures 7/8" x 7/8" x 7/8". This larger, full cube takes longer to melt and so it keeps drinks cold with less dilution of the beverage. Note that the Ice-O-Matic ICE0606FT requires 208-230 volt, 60Hz, 1-phase electrical connection. It also requires a potable water line in, and an external drain (either a floor drain or a drain pump) for purge water. It is an air-cooled ice machine, so it is more susceptible to drops in ice production due to surrounding air and water temperature increases. However, what separates this ice machine model from other air-cooled ice machines is that it makes use of Ice-O-Matic's top air discharge.
The Ice-O-Matic ICE0606FT uses only 19.5 gallons of water for every 100 LB of ice it produces. It has a limited amount of purged water per ice-making cycle. Ice-O-Matic's Harvest Assist technology allows the ICE0606FT to create ice consistently while consuming less energy as well. Harvest Assist helps dislodge ice from the evaporator surface more quickly, meaning the ice-making cycle is shorter. All of these efficiencies help the ICE0606FT earn an ENERGY STAR rating.
Ice-O-Matic ICE0606FT Features
ICE Series Ice Maker
Produces up to 650 LB Full Cube Ice / 24 hours/li>
Top Air Discharge Model - Air Exhaust Vent is located on Top of Unit - No Side Clearance Required!
30" Wide cabinet design is Ultra Low Profile - only 20" high! (requires additional 6" clearance for top vent)
Incorporates a stainless steel interior and exterior, along with fingerprint-proof plastic exterior panels
208-230v/60Hz/1-ph, 10.7 amps
ENERGY STAR Qualified
Ice-O-Matic ICE0606FT Ice Style
Classic, full-sized cubes are the most common cube type
Full Cube measures 7/8" x 7/8" x 7/8"
Great for drinks of any kind, displays, retailing or dispensing
Benefits of Ice-O-Matic ICE0606FT
Growth of bacteria and slime fungus is reduced due to the AgIon built-in antimicrobial protection
Long-term damaging effects of water and ice on the evaporator plate are prevented due to the electroless nickel plating
Harvest Assist technology clears ice off the freezing surface for fast, consistent ice production
Since no side clearance is needed, Top Air Discharge model maximizes space