The Ice-O-Matic ICE0606FW-B40PS is a combination of the Ice-O-Matic ICE0606FW water-cooled full cube ice machine and the B40PS storage bin. The ICE0606FW is designed to be mounted on top of the B40PS bin.
The Ice-O-Matic ICE0606FW cuber head is only 20" tall and 30" wide. The ICE0606FW is capable of producing 618 pounds of Full Cube ice in a day (almost 26 pounds of ice every hour). The Full-Sized Cube produced by the ICE0606FW measures 7/8" x 7/8" x 7/8" and is commonly used for retail beverages and ice bagging applications because of its larger size and the fact that it takes a little longer to melt than smaller cubes. Full cube ice is ideal for on-the-rocks beverages and therefore the ICE0606FW would be a good choice for a bar location.
For installation, the Ice-O-Matic ICE0606FW requires a 208-230 volt electrical connection. The cuber head also needs 2 incoming water lines. First it needs an incoming potable water line for making the ice. Then the water-cooled condenser requires its own incoming water line for circulating around the condenser. Therefore, the ICE0606FW will use a large amount of water (an additional 140 gallons of water per 100 pounds of ice produced will be flushed). The Ice-O-Matic ICE0606FW also requires an external drain that can handle that high volume of water, since both purged water from each ice making cycle AND the water that cooled the condenser must be drained. Note that with water-cooled ice machines, there will be no hot air vented into the surrounding area. This keeps the work environment cooler. Also, water-cooled ice machines don't need any side air vent clearances. Therefore, the Ice-O-Matic ICE0606FW would work in restricted spaces.
The Ice-O-Matic B40PS storage bin is also 30 inches wide and needs no side clearances. The B40PS bin has a storage capacity of up to 344 LB of ice and stands a total of 37.5" high with the included legs set to 6" tall. The Ice-O-Matic B40PS is constructed with a corrosion-resistant stainless steel exterior for durability and an easy-to-clean inner polyethylene liner for excellent sanitary conditions. Between the two bin walls is a layer of foam insulation to preserve the ice supply. The plastic bin door of the B40PS flips up for access to your ice. Plus the B40PS model also has a built-in scoop holder. A bin drain for any melted ice is located at the back of the unit (the bin drain can use the same external drain as the cuber head).
With the low profile cuber head sitting on top of the storage bin, the entire ICE0606FW-B40PS equipment combination measures only 57.5" high. With these compact dimensions, the Ice-O-Matic ICE0606FW-B40PS combo would be recommended for a business with a moderate daily ice usage (around 600 pounds of ice) and space restrictions.
Ice-O-Matic ICE0606FW-B40PS 618 LB 30" Water-Cooled Full Cube Ice Machine w/ Storage Bin.
ICE Series Ice Maker, Produces Full Cube Style Ice, 618 LB production/24 hours. Has self-contained, water-cooled condenser. 30 inches wide, 20 inches high. 115 Volts, 60Hz, 1-phase, 10.0 amps. Includes 30-inch wide Modular Ice Storage Bin with 344 pound storage capacity.
Starting at: $3,723.00 - In stock Brand:
ice0606fw-b40ps Product ID:
Ice-O-Matic ICE0606FW Features
ICE Series Modular Cube Ice Machine
Up to 618 LB ice production / 24 hours
Full Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.0 amps
Ice-O-Matic B40PS Details
Ice Storage Bin
Up to 344 LB storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation