The Ice-O-Matic ICE0606FW-B55PS is a combination of the ICE0606FW water-cooled Full Cube ice machine and the B55PS storage bin. The ICE0606FW is designed to be mounted on top of the B55PS bin.
The Ice-O-Matic ICE0606FW cuber head is only 20" tall and 30" wide. The ICE0606FW is capable of producing 618 pounds of Full Cube ice in a day. The Full-Sized Cube produced measures 7/8" x 7/8" x 7/8" and is commonly used for retail beverages because they take longer to melt and thus there is less dilution of beverages. Full Cubes are also used in ice bagging applications.
Note that for installation, the Ice-O-Matic ICE0606FW requires a 208-230 volt, 60Hz, 1-phase electrical connection. The ICE0606FW cuber head also requires 2 incoming water lines at the installation location. One incoming line needs to be a potable water line for making ice (approximately 19.5 gallons of water for every 100 pounds of ice). The second water line is for cooling the condenser. The ICE0606FW uses an additional 140 gallons of water per 100 pounds of ice produced to cool the condenser and all of this water will be flushed. The Ice-O-Matic ICE0606FW therefore requires an external drain that can handle that high volume of water, since both leftover water from each ice making cycle AND the water that cooled the condenser must be drained. A benefit with water-cooled ice machines is that there will be no hot air discharged into the surrounding area. Also, water-cooled models don't need any side clearances, so the Ice-O-Matic ICE0606FW can be installed in narrow spaces between other equipment.
The Ice-O-Matic B55PS storage bin is 30 inches wide with a storage capacity of up to 510 LB of ice. The B55PS storage bin by itself stands a total of 50" high with 6" legs attached. Ice-O-Matic has constructed the B55PS with a stainless steel exterior, and an inner polyethylene liner, with a layer of foam insulation between the liner and the exterior cabinet. The plastic bin door on the front flips up so you can easily scoop your ice. Plus the B55PS model bin comes with a convenient built-in ice scoop holder. A bin drain is located at the back of the bin so any water from melting ice can flow out of the bin. You can use the same drain for the bin and the cuber head.
With the cuber head sitting on top of the storage bin, the entire ICE0606FW-B55PS equipment combination measures only 70" high. The Ice-O-Matic ICE0606FW-B55PS combo is a smart choice for a business with a moderate daily ice requirements and limited wall space for installation.
Ice-O-Matic ICE0606FW-B55PS 618 LB 30" Water-Cooled Full Cube Ice Machine w/ Storage Bin.
ICE Series Ice Maker, Produces Full Cube Style Ice, 618 LB production/24 hours. Has self-contained, water-cooled condenser. 30 inches wide, 20 inches high. 115 Volts, 60Hz, 1-phase, 10.0 amps. Includes 30-inch wide Modular Ice Storage Bin with 510 pound storage capacity.
Starting at: $3,850.00 - In stock Brand:
ice0606fw-b55ps Product ID:
Ice-O-Matic ICE0606FW Features
ICE Series Modular Cube Ice Machine
Up to 618 LB ice production / 24 hours
Full Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.0 amps
Ice-O-Matic B55PS Details
Ice Storage Bin
Up to 510 LB storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation