The Ice-O-Matic ICE0606FW-CD40130 is a combination of the Ice-O-Matic ICE0606FW water-cooled ice machine and the CD40130 hotel dispenser. The ICE0606FW is designed to be mounted on top of the CD40130 dispenser.
The Ice-O-Matic ICE0606FW cuber head is only 20" tall and 30" wide. The ICE0606FW is capable of producing 618 pounds of Full Cube ice every 24 hours. The ICE0606FW produces a Full Cube that measures 7/8" x 7/8" x 7/8" and which is popular for use in retail beverages. Because of its larger size, it takes longer to melt and there is less dilution of beverages. Full cube ice is ideal for on-the-rocks beverages and therefore the ICE0606FW would be a good choice for a bar location.
For installation, the Ice-O-Matic ICE0606FW requires a 208-230 volt electrical power source. The Cuber Head also needs 2 incoming water lines (one incoming potable water line for making the ice and another water line for cooling the condenser). Note that the ICE0606FW will use a large amount of water (19.5 gallons of water for making ice and an additional 140 gallons of water to cool the condenser - for every 100 pounds of ice produced). The Ice-O-Matic ICE0606FW therefore requires an external drain that can handle a high volume of water, since all of the condenser water must be flushed after each ice making cycle. However, please note that with water-cooled ice machines, there will be no hot air vented into the location, so the surrounding area will be cooler than if it were an air-cooled model. Also, since water-cooled ice machines don't need any side air vent clearances, the Ice-O-Matic ICE0606FW can be installed in locations as narrow as 30 inches.
The Ice-O-Matic CD40130 Hotel Ice & Water Dispenser is a freestanding model, 30 inches wide and 54 inches tall. The dispenser has a built-in ice bin which can store 180 pounds of ice. The CD40130 model has an additional water dispensing feature. Therefore you will need an additional potable water line for the water dispenser. The CD40130 features push activation, it has a large dispensing chute, and a wide ice and water filling area for your customers or employees. Ice-O-Matic's Turbo Dispense technology allows ice to be dispensed at a speed of 1/4 pound of ice per second so there is no waiting for ice. With the added water dispensing feature, your ice vending location will serve as a one-stop destination.
For installation purposes, the Ice-O-Matic CD40130 has a 115-Volt, 60Hz, 1-Phase electrical requirement. The CD40130 also needs an external drain for water that forms in the dispenser's bin from melting ice (you can use the same external drain for the ice maker and the ice dispenser).
When configured properly, the ICE0606HW-CD40130 equipment combination stands 74 inches high and 30 inches wide. The ICE0606HW-CD40130 combo would work well for a business with moderate daily ice requirements and minimal wall space in the installation location.
Ice-O-Matic ICE0606FW-CD40130 618 LB 30" Water-Cooled Ice Machine w/ Hotel Dispenser .
Ice-O-Matic ICE606FW Cube Ice Maker Head, Full Cube Water Cooled Condenser, 618 LB Production/24 Hours, 30" Wide, Antimicrobial Protection, 208-230V.
Vending Ice & Water Dispenser, Push activation, 30" Wide, 54" High, floor model, 180 LB Storage Capacity, 115V.
Starting at: $6,034.00 - In stock Brand:
ice0606fw-cd40130 Product ID:
Ice-O-Matic ICE0606FW Features
ICE Series Modular Cube Ice Machine
Up to 618 LB ice production / 24 hours
Full Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.0 amps
Ice-O-Matic CD40130 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing w/ Water Dispenser
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps