Ice-O-Matic ICE0606HA-CD40030 is a 30" wide air-cooled ice machine mounted on a hotel ice dispenser. The combo is two separate pieces of equipment designed to be installed together.
The Ice-O-Matic ICE0606HA cuber head has a production rate of 650 pounds of Half Cube ice every 24 hours, which works out to 27 pounds of ice every hour of operation. The half cube ice that the Ice-O-Matic ICE0606HA makes measures 7/8" wide x 7/8" deep x 3/8" high. With its smaller size, half cube ice is suitable for dispensing applications, since it is less likely to jam the dispenser. Half Cube ice is also popular for use with retail beverages. Since more of the smaller cubes can fit in a glass, there is greater liquid displacement and thus less beverage per serving.
For installation purposes, note that the Ice-O-Matic ICE0606HA requires a 115 volt electrical connection, a potable water line in, and a drain for any mineral-laden water left over at the end of each ice-making cycle. The ice maker only utilized 19.5 gallons of water for every 100 pounds of ice it produces. In addition, the Ice-O-Matic ICE0606HA uses Harvest-Assist technology to quickly dislodge ice from the evaporator surface, which shortens each ice-making cycle so that you use less electricity. The cuber head uses only 5.0 kWH for each 100 pounds of ice produced. The minimal water and electrical consumption helps make the ICE0606HA an ENERGY STAR rated ice machine.
Note that the Ice-O-Matic ICE0606HA's cabinet is only 20" high and 30" wide. The ICE0606HA ice machine is an air-cooled unit, so when installing the unit, be certain that there is a minimum of 6" of air circulation clearance on the right side and the back for air intake and exhaust vents. Optimal air flow is required for the proper functioning of the ice machine.
The Ice-O-Matic CD40030 takes up very little wall space. The Hotel Ice Dispenser is 30 inches wide and stands at 54 inches tall by itself. The dispenser has its own built-in ice storage bin. The Ice-O-Matic CD40030 can store up to 180 pounds of ice at any one time. For ease of operation, the ice dispenser has a push activation feature, a large dispensing chute, and a wide ice filling area. Ice-O-Matic has included their Turbo Dispense technology, allowing ice to be dispensed at a speed of 1/4 pound of ice per second. In addition, Ice-O-Matic has also considered the effects of heavy customer use, so the CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof. Note that the Ice-O-Matic CD40030 requires a 115-Volt, 60Hz, 1-Phase electrical power source. The installation location also requires an external drain for water from melted ice.
The ICE0606FA-CD40030 equipment combo would be a smart choice for a business with moderate daily ice requirements and limited space for installation. The two pieces installed together stand only 74 inches high and 30 inches wide.
Ice-O-Matic ICE0606HA Features
ICE Series Modular Cube Ice Machine
Up to 650 LB ice production / 24 hours
Half Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.7 amps
ENERGY STAR Qualified
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps