The Ice-O-Matic ICE0606HA-CD40130 is a 30" wide air-cooled ice machine mounted on an ice storage bin. The combo is two separate pieces of equipment designed to be installed together.
The Ice-O-Matic ICE0606HA cuber head has a production rate of 650 pounds of Half Cube ice every 24 hours, which works out to 27 pounds of ice every hour of operation. The half cube ice that the Ice-O-Matic ICE0606HA makes measures 7/8" wide x 7/8" deep x 3/8" high. With its smaller size, half cube ice is suitable for dispensing applications, since it is less likely to jam the dispenser. Half Cube ice is also popular for use with retail beverages. Since more of the smaller cubes can fit in a glass, there is greater liquid displacement and thus less beverage per serving.
Note that for installation purposes, the Ice-O-Matic ICE0606HA's cabinet is only 20" high and 30" wide. The ICE0606HA ice machine is an air-cooled unit, so when installing the unit, be certain that there is a minimum of 6" of air circulation clearance on the right side and the back for air intake and exhaust vents. The ICE0606HA needs good air circulation at the vents for proper functioning of the ice machine.
The Ice-O-Matic ICE0606HA requires a 115-volt electrical connection, a potable water line in, and a drain for the purged mineral-laden water after each ice-making cycle. The cuber head only uses 19.5 gallons of water and only 5.0 kWH electricity for every 100 pounds of ice it produces. In addition, the Ice-O-Matic ICE0606HA uses Harvest-Assist technology to quickly dislodge ice from the evaporator surface, which shortens each ice-making cycle so that you use less electricity. The efficient use of water and electrical resources helps the ICE0606HA earn its ENERGY STAR rating.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice and water dispenser. The dispenser unit is a freestanding configuration and measures 54 inches tall without the cuber head. The CD40130 dispenser dispenses ice, plus it also has a factory-installed water dispensing chute for additional convenience (the CD40130 dispenser will therefore require a separate incoming potable water line). The hotel ice dispenser has its own built-in ice storage bin with a capacity of up to 180 pounds of ice. The Ice-O-Matic CD40130 unit has a compact cabinet, allowing convenient ice and water dispensing in locations with limited space. With its push activation feature, a large dispensing chute, and a wide ice-filling area, the CD40130 is easy for your customers or employees to operate. Ice-O-Matic has also included its Turbo Dispense technology, which allows ice dispensing at speeds of 1/4 pound of per second. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source for proper functioning. The installation location also requires an external drain for water forming on the bottom of the built-in bin from melted ice (you can use the same drain for both the cuber head and the ice dispenser).
When properly stacked and configured, the ICE0606HA and the CD40130 equipment combination stands 74 inches high and 30 inches wide. With these external dimensions, the 650 LB daily ice production rate and the 180 LB bin capacity, the ICE0606HA-CD40130 combo should be considered for a business with moderate ice requirements and restricted wall space where you are installing the equipment.
Ice-O-Matic ICE0606HA-CD40130 650 LB 30" Air-Cooled Ice Machine w/ CD40130 Hotel Dispenser.
ICE Series Ice Maker, Produces Half Cube Style Ice, 650 LB production/24 hours. Has self-contained, air-cooled condenser. 30 inches wide, 20 inches high. 115 Volts, 60Hz, 1-phase, 10.7 amps. ENERGY STAR Certified. Paired with 30-inch wide Hotel Ice Dispenser with Push Chute Ice Dispensing and Integrated Ice Storage Bin with 180 pound capacity, plus integrated Push Lever Activated Water Dispenser. 115 Volts, 60Hz, 1-phase, 2.1 amps. 73.25 inches total height.
Starting at: $5,237.40 - In stock Brand:
ice0606ha-cd40130 Product ID:
Ice-O-Matic ICE0606HA Features
ICE Series Modular Cube Ice Machine
Up to 650 LB ice production / 24 hours
Half Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.7 amps
ENERGY STAR Qualified
Ice-O-Matic CD40130 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing w/ Water Dispenser
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps