The Ice-O-Matic ICE0606HA-IOD250 is an air-cooled ice machine paired with a countertop ice dispenser. The combo is two separate pieces of equipment designed to be installed together.
The Ice-O-Matic ICE0606HA cuber head has a production rate of 650 pounds of Half Cube ice every 24 hours. The half cube ice that the Ice-O-Matic ICE0606HA makes measures 7/8" wide x 7/8" deep x 3/8" high. The smaller half cube is suitable for dispenser applications, since there is less of a chance that the small cubes will jam the dispenser. Half Cube ice is often used in retail beverages because more of the smaller cubes can fit in a glass. More ice means more liquid displacement and thus less beverage in each glass.
The Ice-O-Matic ICE0606HA needs a 115-volt electrical power source, a single potable water line in, and an external drain for the small amount of unfrozen water left over at the end of every ice-making cycle. The cuber head only uses 19.5 gallons of water for every 100 pounds of ice it produces. In addition, the Ice-O-Matic ICE0606HA uses Harvest-Assist technology to rapidly remove ice from the evaporator. Harvest Assist shortens each ice-making cycle so that you use less electricity. In addition, the ICE0606HA uses only 5.0 kWH electricity for each 100 pounds of ice it makes. The minimal water and electricity use helps the ICE0606HA ice machine earn its ENERGY STAR rating.
Note that the Ice-O-Matic ICE0606HA cuber head is only 20" high and 30" wide. Since it is an air-cooled model, optimal air flow is required for proper functioning per the manufacturer. Be certain that there is a minimum of 6" of clearance on the right side and the back for the air intake and exhaust vents.
The 30" wide Ice-O-Matic IOD250 countertop ice dispenser is lever-activated. You can push a cup, bucket or other container against the lever to dispense your ice and the dispenser area has a 10 1/2" cup clearance. The IOD250 dispenser has an internal storage bin that can hold up to 250 pounds of ice, so you and your customers will likely always have ice. Note that the countertop IOD250 can accommodate most 30" wide ice machine heads such as the ICE00606HA. The Ice-O-Matic IOD250 is ONLY able to dispense either cube ice or pearl (nugget-style) ice. Ice-O-Matic's Direct Dispense technology ensures that dispensed ice hits the glass every time.
With the Ice-O-Matic ICE0606HA cuber head properly mounted on the IOD250 countertop ice dispenser, the entire equipment combo measures just under 60" high. With these dimensions, most commercial countertops can accommodate the Ice-O-Matic ICE0606HA-IOD250 combo, either behind the counter or in a self-service application. With the available 650 pounds of ice each day and the 250 pound capacity of the internal bin, the ICE0606HA-IOD250 combo is a great choice for a business with steady and moderate daily ice usage.
Ice-O-Matic ICE0606HA Features
ICE Series Modular Cube Ice Machine
Up to 650 LB ice production / 24 hours
Half Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.7 amps
ENERGY STAR Qualified
Ice-O-Matic IOD250 Features
Counter-Model, Lever Dispensing
Cube & Pearl Dispensing ONLY
250 LB Storage Capacity
Required* Bin Kit - KBT25030 is INCLUDED