The Ice-O-Matic ICE0606HW-B55PS is a combination of the Ice-O-Matic ICE0606HW water-cooled full cube ice machine and the B55PS storage bin. The ICE0606HW cuber head is designed to be mounted on top of the B55PS bin.
The Ice-O-Matic ICE0606HW cuber head is only 20" tall, 30" wide and is constructed from corrosion-resistant stainless steel and fingerprint-proof plastic. The ICE0606HW is capable of producing 618 pounds of Half Cube ice every 24 hours (which comes out to just under 26 pounds of ice dropping into the bin every hour). The Half-Sized Cube produced by the ICE0606HW measures 7/8" x 7/8" x 3/8". The smaller Half Cube is popular for dispenser applications because the cubes are less likely to get jammed in the dispensing mechanism. In addition, more Half Cube ice can fit in each glass, so there is less beverage per serving, saving you money.
The Ice-O-Matic ICE0606HW requires a 208-230 volt electrical connection and 2 incoming water lines for proper installation. One of the water lines must be potable water that will become the ice (19.5 gallons of water per 100 pounds of ice). The second water line is for cooling the condenser (an extra 140 gallons of water for every 100 pounds of ice produced). The Ice-O-Matic ICE0606HW requires an external drain (a gravity floor drain or a drain pump) that can handle a high volume of water, since purged water from each ice making cycle AND the condenser water all must be drained. Because there are no fans or intake and discharge vents, no hot air vented into the surrounding area. The installation location will be cooler. Also, because water-cooled ice machines don't need any side clearances for air vents, the Ice-O-Matic ICE0606HW can be installed in spaces that are 30" wide.
The Ice-O-Matic B55PS storage bin is 30 inches wide and 50 inches high, with a storage capacity of up to 510 LB of ice. The B55PS has a stainless steel exterior for durability, and an inner polyethylene liner for optimal sanitary conditions. There is a layer of foam insulation between the liner and the exterior cabinet to better preserve your ice. The plastic front bin door flips up for easy access to ice. An extra feature of the B55PS model bin is a convenient built-in ice scoop holder. Lastly, a bin drain is located at the back of the bin to remove any standing water that may form from melting ice. The bin and the cuber head can utilize the same external drain.
With the cuber head properly mounted on top of the storage bin, the entire ICE0606HW-B55PS equipment combination measures only 70" high. This means the equipment will take up minimal space. The Ice-O-Matic ICE0606HW-B55PS combo would be a good choice for a business with moderate daily ice usage and height restrictions at the installation location.
Ice-O-Matic ICE0606HW-B55PS 618 LB 30" Water-Cooled Half Cube Ice Machine w/ Storage Bin.
Ice-O-Matic Cuber Ice Maker 30" wide, water-cooled, approx 618 LB/24 hours (Rated at 70 degrees F Air Temp / 50 degrees F Water), half size cube, Stainless Steel and Molded Plastic Exterior, antimicrobial protection.
Ice-O-Matic B55PS Bin Capacity 510 LB, Stainless Steel bin exterior, molded plastic bin door.
Starting at: $3,324.28 - In stock Brand:
ice0606hw_b55ps Product ID:
Ice-O-Matic ICE0606HW Features
ICE Series Modular Cube Ice Machine
Up to 618 LB ice production / 24 hours
Half Cube Style Ice
30" Wide Cuber Head is Low Profile at 20" High
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 10.0 amps
Ice-O-Matic B55PS Details
Ice Storage Bin
Up to 510 LB storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation