Ice-O-Matic ICE0806FA-CD40030 is a 30" wide air-cooled ice machine mounted on a hotel ice dispenser. The combo is two separate pieces of equipment designed to be installed together.
The Ice-O-Matic ICE0806FA cuber head has a production rate of 897 pounds of Full Cube ice every 24 hours, which works out to 37 pounds of ice every hour of operation under optimal temperature conditions. The Ice-O-Matic ICE0806FA makes ice cubes that measure 7/8" wide x 7/8" deep x 7/8" high. Full Cube ice is popular for use with retail beverages, since they take slightly longer to melt and there is less dilution of the drink.
Note that the Ice-O-Matic ICE0806FA requires a 208-230 volt electrical connection for installation. For efficiency, the Ice-O-Matic ICE0806FA uses Harvest-Assist technology to quickly dislodge ice from the evaporator surface. The Harvest-assist shortens each ice-making cycle, meaning less electricity is used over time. The cuber head uses only 5.47 kWH for each 100 pounds of ice produced. Other installation requirements are a potable water line in and a drain for the purged, mineral-laden water after each ice-making cycle. The Ice-O-Matic ICE0806FA optimally uses just 22 gallons of water for every 100 pounds of ice it produces. Both the minimal water and electrical consumption help make the ICE0806FA an ENERGY STAR rated ice machine.
The Ice-O-Matic ICE0806FA measures 26" high and 30" wide. In addition, since the ICE0806FA ice machine is an air-cooled unit, you must allow a minimum of 6" of air circulation clearance on the right side and the back of the unit for air intake and exhaust vents. This air flow is required for the proper functioning of the ice machine, so plan ahead for your installation.
The Ice-O-Matic CD40030 Hotel Ice Dispenser takes up very little wall space. The dispenser is 30 inches wide and stands at 54 inches tall by itself. The CD40030 doesn't make ice and requires an ice maker like the ICE0806FA mounted on top, but the hotel dispenser stores and dispenses plenty of ice. The Ice-O-Matic CD40030's built-in ice storage bin can store up to 180 pounds of ice at any one time. When considering your options for your hotel, motel or other self-service application, note that the ice dispenser has a push activation feature for your customers or employees. A large dispensing chute and a wide ice filling area make the CD40030 easy to use when filling most hotel ice buckets. This hotel ice dispenser comes with Ice-O-Matic's Turbo Dispense technology, meaning that the ice can be dispensed at a speed of 1/4 pound of ice per second. In addition, the CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof, protecting the unit from heavy customer or employee use. Please note that the Ice-O-Matic CD40030 requires a 115-Volt, 60Hz, 1-Phase electrical power source, which is different from the voltage of the ICE0806FA. The installation location also requires an external drain for water from melted ice.
The ICE0806FA-CD40030 equipment combo would be a smart choice for a business with moderate to high daily ice requirements. The ICE0806FA can fill the CD40030's internal bin in just 5 hours, so your business will always have ice ready for dispensing. Note that the two pieces installed together stand 80 inches high and 30 inches wide. Remember that you need clearance at the back and right side of the combo.
Ice-O-Matic ICE0806FA Features
ICE Series Modular Cube Ice Machine
Produces up to 897 LB ice production / 24 hours
Full Cube Style Ice
30" Wide, 26" High cabinet design
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon Compound
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 13.2 amps
ENERGY STAR Qualified
Ice-O-Matic CD40030 Features
Vending Hotel Ice Dispenser
Floor Model, Push Activated Dispensing
180 LB Ice Storage Capacity, 30" Wide
Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
115v/60/1-ph, 2.1 amps