The Ice-O-Matic ICE0806FW-B55PS is a combination of the ICE0806FW water-cooled Full Cube ice machine and the B55PS storage bin. The ICE0806FW is designed to be mounted on top of the B55PS bin.
The Ice-O-Matic ICE0806FW cuber head is 26" tall and 30" wide. The ICE0806FW is capable of producing 898 pounds of Full Cube ice every 24 hours. The Full-Sized Cube that the ICE0806FW produces measures 7/8" x 7/8" x 7/8". For less dilution of retail beverages, especially "on-the-rocks" drinks, full cube ice works well because it cools liquids while taking longer to melt.
The Ice-O-Matic ICE0806FW requires a 208-230 volt, 60Hz, 1-phase electrical connection, plus 2 incoming water lines at the installation location. One incoming line needs to be a potable water line for making ice (approximately 23.1 gallons of water for every 100 pounds of ice). The second water line is for cooling the condenser. The ICE0806FW unfortunately uses an additional 112 gallons of water per 100 pounds of ice produced to cool the condenser. All of the condenser water will be flushed (up to 1005 gallons on a full day of ice-making). The Ice-O-Matic ICE0806FW therefore requires an external drain that can handle that high volume of water. One of the benefits of a water-cooled ice machine is that there will be no hot air discharged into installation location. Also, water-cooled models don't need any side clearances, so the Ice-O-Matic ICE0806FW can be installed in narrow spaces as small as 30", including between other equipment.
The Ice-O-Matic B55PS storage bin is 30" wide with a storage capacity of 510 pounds of ice. The B55PS storage bin stands a total of 50" high with its 6" legs attached. Ice-O-Matic has constructed the B55PS with a stainless steel exterior, and an inner polyethylene liner, with a layer of foam insulation between the liner and the exterior cabinet. The plastic bin door on the front flips up so you can easily scoop your ice. Plus the B55PS model bin comes with a convenient built-in ice scoop holder. Note that there is a drain at the back of the bin so any water from melting ice can be removed (You can use the same drain for the bin and the cuber head's condenser water).
With the cuber head mounted on the storage bin, the ICE0806FW-B55PS equipment combination measures 76" high. The Ice-O-Matic ICE0806FW-B55PS combo is a smart choice for a business with a moderate daily ice requirements.
Ice-O-Matic ICE0806FW Features
ICE Series Modular Cube Ice Machine
898 LB ice production / 24 hours
Full Cube Style Ice
30" Wide, 26" High Cuber Head
Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
208-230v/60Hz/1-ph, 9.8 amps
Ice-O-Matic B55PS Features
Ice Storage Bin
Up to 510 LB ice storage capacity
6" Adjustable Legs
Large Door Opening For Scooping or Shoveling Ice
Allows Easy Access To Ice Without A Stepping Stool
Stainless steel bin exterior
Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation