The Ice-O-Matic CD40022 Hotel Ice Dispenser is a 22 inch wide floor model ice-dispensing unit with a built-in storage bin designed to be paired with a modular cuber head. Note that this unit does NOT make ice as it is only a dispenser. A 22-inch wide cuber head, such as an Ice-O-Matic ICE0320, would need to be mounted on top of the dispenser unit. With its narrow design, the Ice-O-Matic CD40022 can fit in almost any location, taking up very little wall space and allowing convenient ice-dispensing wherever you need it. The hotel dispenser stands 54 inches tall without a cuber head mounted, so be certain to allow head room for an additional 23 inches. The push activation feature with a wide dispensing chute and filling area means that the Ice-O-Matic CD40022 can accommodate nearly any size ice bucket. Ice-O-Matic has also incorporated their Turbo Dispense technology for dispensing ice at a speed of 1/4 pound of ice per second. Although the Ice-O-Matic CD40022 is only 22 inches wide, its storage bin can hold up to 120 pounds of ice ready for dispensing at a moment's notice. And for the busy location with lots of customer use, the hotel ice dispenser's polyethylene exterior is smudge and fingerprint proof, so your equipment will always appear in good condition. The Ice-O-Matic CD40022 requires 115 Volt, 60Hz, 1-Phase electrical power source at the installation location. The location also requires a drain, (either a floor drain or an external drain pump - sold separately) since the Ice-O-Matic CD40022 will have runoff water from melted ice in the storage bin and the cuber head sitting on top will also have purge water after each ice making cycle.