The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30 inch wide hotel or motel style ice dispenser with its own built-in storage bin. The dispenser unit stands at 54 inches tall and is designed to be paired with a modular cuber head. Note that the Ice-O-Matic CD40030 does NOT make ice and requires the cuber head to be mounted on top of the unit. A 30 inch wide cuber head, such as an Ice-O-Matic ICE0400, would be an ideal fit for many locations. Be certain to allow for additional space on top of the unit for the cuber head. The Ice-O-Matic CD40030 takes up very little wall space, allowing convenient ice-dispensing in a narrow vending alcove or other location with minimal space. Since the Ice-O-Matic CD40030 can store up to 180 pounds of ice at any one time, your customers or guests should always be able to dispense ice. The push activation feature, large dispensing chute, and wide ice filling area means that the Ice-O-Matic CD40030 can accommodate nearly any size ice bucket. Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a speed of 1/4 pound of ice per second. Ice-O-Matic has also taken into consideration the effects of lots of customer use, so the hotel ice dispenser's polyethylene exterior is smudge and fingerprint proof, so your CD40030 will always appear in good condition. When planning your installation, note that the Ice-O-Matic CD40030 requires 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain, (either a floor drain or an external drain pump - sold separately) since the CD40030 will have runoff water from ice that may have melted in the storage bin and any cuber head sitting on top will typically purge some water after each ice making cycle.