Ice-O-Matic CD40130 180-LB Capacity 30" Wide Hotel Ice and Water Dispenser
Ice-O-Matic CD40130 Product Details
The Ice-O-Matic CD40130 Hotel Ice and Water Dispenser is a 30 inch wide hotel or motel style ice and water dispenser with its own built-in storage bin. Unlike the CD40030 model, which is exclusively an ice dispenser, the CD40130 includes an integrated water dispenser. The dispenser unit stands at 54 inches tall and is designed to be paired with a modular cuber head.
Note that the Ice-O-Matic CD40130 does NOT make ice and requires the cuber head to be mounted on top of the unit. A 30 inch wide cuber head, such as an Ice-O-Matic ICE0400, would be an ideal fit for many locations. Be certain to allow for additional space on top of the unit for the cuber head. The Ice-O-Matic CD40130 takes up very little wall space, allowing convenient ice-dispensing in a narrow vending alcove or other location with minimal space.
Since the Ice-O-Matic CD40130 can store up to 180 pounds of ice at any one time, your customers or guests should always be able to dispense ice. The push activation feature, large dispensing chute, and wide ice filling area means that the Ice-O-Matic CD40130 can accommodate nearly any size ice bucket. Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a speed of 1/4 pound of ice per second. Ice-O-Matic has also taken into consideration the effects of lots of customer use, so the hotel ice dispenser's polyethylene exterior is smudge and fingerprint proof, so your CD40130 will always appear in good condition.
When planning your installation, note that the Ice-O-Matic CD40130 requires 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain, (either a floor drain or an external drain pump - sold separately) since the CD40130 will have runoff water from ice that may have melted in the storage bin and any cuber head sitting on top will typically purge some water after each ice making cycle.
Ice-O-Matic CD40130 Features
- Vending Ice & Water Dispenser
- Push Dispensing w/ Water Dispenser
- Floor Model
- 180 lb Storage Capacity
- Designed To Accept 30" Wide Models ICE Series or Cube ICE Makers
Ice-O-Matic CD40130 Benefits
- Turbo Dispense Dispenses 1/4 Lbs Of Ice Per Second
- Power Clean Allows Access To The Bin For Easy Cleaning
- 4" Foam Insulation For Maximum Ice Preservation
- Constructed From Corrosion-Resistant Stainless Steel & Fingerprint Proof Plastic
- Great For Hard Water, Food Safety and Tight Places
|Ship Weight||220 lbs.|
|Dimensions (HxWxD)||53.25" x 30" x 33.5"|
|Height to Dispenser||8.8"|
|Dispenser Type||Ice and Water|
|Bin Storage Capacity||180 lb|
|Dispenser Style||Push Button|
|Installation Type||Floor Model|
A PDF viewer is required to view this product's information.:Download Manufacturer's Specification Sheet