The Ice-O-Matic CIM0320HW is a water-cooled Modular style ice machine that produces up to 349 pounds of Half-sized Cube ice every 24 hours. Ice-O-Matic's half cube ice measures 7/8 inches by 7/8 inches by 3/8 inches and works well with dispenser applications. Half cube ice is often used for retailing beverages, since more cubes can fit in each glass. The Ice-O-Matic CIM0320HW requires a 115 volt, 60 Hz, 1-Phase power supply. The Ice-O-Matic CIM0320HW cuber head is just over 22 inches wide. Because the water-cooled condenser does not require air circulation, the ice maker cabinet does not require clearance on the sides for air intake and exhaust vents, so you can fit the unit in locations where available wall space is at a premium (minimum of 22 inches left to right). Note, however, that the water-cooled model does require a drain for the 157 gallons of water used to cool the condenser for each 100 pounds of ice produced. In addition, the Ice-O-Matic CIM0320FW utilizes Ice-O-Matic's Harvest Assist technology to shorten the ice-making cycle, which reduces your electricity consumption.
The Ice-O-Matic B42PS storage bin is 22 inches wide and can hold up to 351 LB of ice. The B42PS storage bin measures 50" high with the 6" adjustable legs. Ice-O-Matic has constructed the B42PS with stainless steel exterior and an inner polyethylene liner with a layer of foam insulation in between. The bin door flips up for easy access for scooping ice. Ice-O-Matic has included a built-in ice scoop holder on the inner wall of the bin. Some kind of drain is required (either a floor drain or a drain pump) for the B42PS. A bin drain is located at the back of the bin to allow any standing water from ice melt to drain out. You can utilize the same floor drain for both the storage bin and the water-cooled cuber head (CIM0320HW).
The Ice-O-Matic CIM0320HW mounted on the B42PS storage bin together stand just over 73" tall. Both units are 22" wide, so this ice machine and storage bin combo is ideal for locations where you have minimal space left to right and ceiling to floor (just over 6 feet is required). Ice-O-Matic has also incorporated its PURE ICE technology into all ice making surfaces that come into contact with water or ice, utilizing built-in AgIon antimicrobial compound in the ice-making equipment. With a production rate of 349 LB per day and a bin storage capacity of 351 LB, the ICE0320FW-B42PS ice machine and storage bin combo would be a good choice for a foodservice business with moderate ice requirements and limited space.