Ice-O-Matic CIM0330HW-B40PS 333 LB 30" Water-Cooled Half Cube Ice Machine w/ Storage Bin
The Ice-O-Matic CIM0330HW-B40PS is a combination of the Ice-O-Matic CIM0330HW water-cooled half cube ice machine and the B40PS storage bin. The Ice-O-Matic 30" wide CIM0330HW cuber head is capable of producing up to 333 LB of Half-Sized cube ice every 24 hours. The Half-Sized Cube measures 7/8" x 7/8" x 3/8" and is commonly used for beverages, for dispensing applications and blending drinks. The Ice-O-Matic CIM0330HW requires a 115 volt electrical connection, two water lines in (one for ice-making and one for the condenser), and a drain for both the water purged at the end of the ice making cycle AND for the water that cooled off the condenser. Because it is a water-cooled ice machine, the ICE0250HW will use significantly more water than a comparable air-cooled model (an additional 177 gallons of water per 100 LB of ice produced will be flushed). However, one of the benefits to water-cooled models is there will be no hot air vented into the area and the unit will not require any additional side clearances. Therefore, the Ice-O-Matic CIM0330HW would work well if you have a narrow space for installation or your location's air is already very warm.
The Ice-O-Matic B40PS storage bin is 30 inches wide with a storage capacity of up to 344 LB of ice. The storage bin is a total of 37.5" high with the adjustable legs measuring at 6". The Ice-O-Matic B40PS is constructed with a stainless steel and rotocast plastic exterior and an inner polyethylene liner with a layer of foam insulation between. The bin door of the Ice-O-Matic B40PS is molded plastic and flips up for easy access to ice for scooping. A bin drain for any melted ice is located at the back of the unit, in order to remove any standing water from ice melt.
With the low profile 20" tall CIM0330HW cuber head sitting on top of the bin, the total height of the equipment combination is only 57.5" high. With these dimensions, the Ice-O-Matic CIM0330HW-B40PS cuber head and bin combo would be great for businesses with a moderate daily ice requirement and limits to their ceiling overhead space, as well as restricted air circulation.
Ice-O-Matic CIM0330HW Features
- ICE Series Modular Half Cube Ice Machine
- Up to 333 LB ice production / 24 hours
- Water-cooled condenser
- 30" Wide Cuber Head is Low Profile at 20" High
- Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
- PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
- Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability
Ice-O-Matic B40PS Details
- Ice Storage Bin
- Up to 344 LB storage capacity
- 6" Adjustable Legs
- Large Door Opening For Scooping or Shoveling Ice
- Allows Easy Access To Ice Without A Stepping Stool
- Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation
|Ship Weight||150 LB.|
|24 Hour Yield||333 LB|
|Ice Type||Half Cube|
|Dimensions(HxWxD)||20" x 30.13" x 24.25"|
|Water Usage||35 gal/100 LB|
|Water Usage for Condenser||177 gal/100 LB|
|Ship Weight||103 LB|
|Dimensions(HxWxD)||37.5" x 30" x 31"|
A PDF viewer is required to view this product's information.:Download Manufacturer's Specification Sheet