The Ice-O-Matic CIM0430HA/CD40130 is an air-cooled modular ice machine that is to be mounted on the hotel ice dispenser. The equipment combination comes as two separate equipment pieces and is designed to be stacked. The Ice-O-Matic CIM0430HA cuber head has an ice production rate of 435 pounds of full cube ice every day. The CIM0430HA's cabinet is 30 inches wide and 21 inches high. The Ice-O-Matic CIM0430HA has an air-cooled condenser, and therefore the unit requires a minimum of 6 inches of clearance on the right side and at the back of the unit for air vent circulation. The half-sized cube ice that the Ice-O-Matic CIM0430HA makes measures 7/8" x 7/8" x 3/8". Half cube ice is ideal for dispensing applications because their smaller size means it is less likely to jam the dispenser mechanism. The Half sized cubes also are great for making blended drinks since the half cubes are hard enough to stand up to the blender's blades and small enough to keep from jamming under the blender blades and burning out your blender motor. Plus retailers appreciate that more half cubes of ice can fit in each glass, meaning more liquid displacement than a glass of large cube ice. When considering your installation location, note that the Ice-O-Matic CIM0430HA requires a 115 volt electrical connection, a potable water line in, and a drain for any purge water that didn't freeze at the end of each cycle of ice-making. Ice-O-Matic has included its Harvest-Assist technology in the CIM0430HA cuber head so that ice is released more quickly from the evaporator surface, which saves time and electricity each ice-making cycle. The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice dispenser. The CD40130 dispenser unit stands at 54 inches tall. One of the primary features of the CD40130 dispenser is that it not only dispenses ice but also has a factory-installed water dispensing chute for additional convenience (note that the CD40130 dispenser will require its own incoming potable water line). The hotel ice dispenser has its own built-in storage bin with a capacity of up to 180 pounds of ice at one time. The Ice-O-Matic CD40130 unit takes up very little wall space, allowing convenient ice and water dispensing in locations with minimal wall space. With its push activation feature, a large dispensing chute, and a wide ice-filling area, the CD40130 can accommodate most ice buckets that your customers or employees may use. Ice-O-Matic has also included its Turbo Dispense technology, so ice is dispensed at a speed of 1/4 pound of ice per second. In addition, the CD40130 hotel ice dispenser's exterior is smudge and fingerprint proof so it can stand up to heavy customer traffic. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain for water from ice that may have melted in the dispenser's bin (you can use the same drain for both the CIM0430HA cuber head and the CD40130 ice dispenser). With the CIM0430HA cuber head mounted on the CD40130, the equipment combination stands 74 inches high. Both units are 30 inches wide and are designed to sit with one unit atop the other. With these dimensions, the moderate 435 LB daily ice production rate, and the 180 LB bin capacity, the CIM0430HA/CD40130 combo would work well for a business with moderate daily ice requirements and restricted installation space.
Ice-O-Matic CIM0430HA Features:
- Stainless Steel Exterior construction
- Durable, Nickel Plating on Evaporator
- Corrosion Resistant
- Built in Agion antimicrobial protection
- Dishwasher safe, Plastic Food Zone Parts snap in and out for easy cleaning
- Produces up to 435 LB / 24 hours
- Produces Half Cube ice
- Self-contained, Air-cooled Condenser
- Refrigerant: R404a
- Dual Exhaust from side or top for more installation options
- Universal Smart Harness control board for easy install, diagnostics, and servicing
- 115 Volt, 60 Hz, 1-phase electrical
- 20 PSIG minimum water pressure for operation
- ENERGY STAR Rated
Ice-O-Matic CD40130 Features
- Vending Hotel Ice Dispenser
- Floor Model, Push Activated Dispensing w/ Water Dispenser
- 180 LB Ice Storage Capacity, 30" Wide
- Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
- 115v/60/1-ph, 2.1 amps
Left to Right: 30 1/2"
Front to Back: 33 1/2""
Height: 74 1/2"
|Ship Weight||385 LB|
|Manufacturer Part #||CIM0430HA/CD40130|
|Amps||11 (Ice Machine Head), 2.1 (Dispenser)|
|Overall Dimensions (HxWxD)||74-1/2" x 30-1/4" x 33-1/2"|
|24 Hour Ice Yield||435 Pounds|
|Bin Storage Capacity||180 Lbs.|
|Dispenser Style||Push Button|
|Condenser Type||Air Cooled|
|Ice Type||Half Size Cubes|
|Ice Machine Power Usage||5.43 kWh per 100 lb|
|Type||Ice Machines with Dispensers|
|Ice Machine Water Usage||19.8 Gallons per 100 lb|
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made In America
This item was made in the United States of America.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
Energy Star Qualified
This item is Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy.
This item complies with the standards by the Conformance European (CE), a division of the Intertek group.
Proposition 65 requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.
Buy on credit
Contiguous U.S. Only
- 3 Years Parts & Labor On Ice Machine
- 5 Years Parts Coverage On Evaporator and Compressor
- 3 Years Parts & Labor On Dispenser