Ice-O-Matic CIM0430HW-B40PS 496 LB 30" Water-Cooled Half Cube Ice Machine w/ Storage Bin

Free Shipping
Ships Same Day
In stock
Ship Weight 165 LB
24 Hour Yield 496 LB
Condenser Water-Cooled
Ice Type Half Cube
Dimensions(HxWxD) 20" x 30.13" x 24.25"
Hertz 60
Phase 1
Voltage 115
Water Usage 29 gal/100 LB
Water Usage for Condenser 148 gal/100 LB
Ship Weight 103 LB
Dimensions(HxWxD) 37.5" x 30" x 31"
Capacity 344 LB

The Ice-O-Matic CIM0430HW-B40PS is a combination of the Ice-O-Matic CIM0430HW water-cooled half cube ice machine and the B40PS storage bin. The Ice-O-Matic 30" wide CIM0430HW cuber head is capable of producing up to 496 lbs of ice in a day. The Half-Sized Cube measures 7/8" x 7/8" x 3/8" and is commonly used for beverages, for dispensing applications and blending drinks. The CIM0430HW model's cabinet is only 20" high for efficient use of space. The Ice-O-Matic CIM0430HW requires a 115 volt electrical connection, two water lines in (one for making ice and one for cooling the condenser), and a drain for the water purged at the end of the ice making cycle AND for the water that cooled off the condenser. Because it is a water-cooled ice machine, the CIM0430HW will use significantly more water than a comparable air-cooled model (an additional 177 gallons of water per 100 LB of ice produced will be flushed). However, one of the benefits to water-cooled models is there will be no hot air discharged into the area and the cuber head will not require any additional side clearances. Therefore, the water-cooled Ice-O-Matic CIM0430HW would work well if you don't have much space for installation or the installation location is overly warm.

The Ice-O-Matic B40PS storage bin is 30" wide with a storage capacity of up to 344 LB of ice. The storage bin is a total of 37.5" high with the adjustable legs measuring at 6". The Ice-O-Matic B40PS is constructed with a stainless steel and plastic exterior and an inner polyethylene liner with a layer of foam insulation between for preserving your ice. The B40PS bin door is molded plastic and flips up for easy access to ice. A bin drain for any melted ice is located at the back of the Ice-O-Matic B40PS, in order to allow any standing water from ice melt to drain.

The total height of the equipment combination is only 57.5" high with the low profile CIM0430HW cuber head sitting on top of the B40PS bin. With these dimensions, the Ice-O-Matic CIM0430HW-B40PS cuber head and bin combo would be great for businesses with moderate daily ice requirements and space restrictions.

Ice-O-Matic CIM0430HW Features

  • ICE Series Modular Half Cube Ice Machine
  • Up to 496 LB ice production / 24 hours
  • Water-cooled condenser
  • 30" Wide Cuber Head is Low Profile at 20" High
  • Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
  • PURE ICE Built-In Antimicrobial Protection with AgIon compound incorporated into surfaces that contact water and ice.
  • Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability

Ice-O-Matic B40PS Details

  • Ice Storage Bin
  • Up to 344 LB storage capacity
  • 6" Adjustable Legs
  • Large Door Opening For Scooping or Shoveling Ice
  • Allows Easy Access To Ice Without A Stepping Stool
  • Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation
More Information
Warranty Info
  • 3 Years Parts & Labor on Ice Machine
  • 5 Years Parts Coverage on Evaporator and Compressor
  • 2 Year Parts & Labor On The Storage Bin
  • Brand Ice-O-Matic
    24/hr Ice Production 400 - 600 lbs
    Ice Type Half Cube
    Condenser Water-Cooled
    Voltage 115V
    Bin Width 30 in.
    Ice Storage Capacity 300 - 400 lbs
    © 2003-2018 IceMachinesPlus All Rights Reserved.