Ice-O-Matic CIM0430HW/B55PS 460 LB 30" Water-Cooled Half Cube Ice Machine w/ Storage Bin

Item: #403016 MFG: #CIM0430HW/B55PS

The Ice-O-Matic CIM0430HW/B55PS is a combination of the Ice-O-Matic CIM0430HW water-cooled half cube ice machine and the B55PS storage bin. The 30" wide Ice-O-Matic CIM0430HW ice machine can produce up to 460 pounds of half-sized cube ice every 24 hours. The cuber head is only 21" tall and does not require any additional clearance above the unit or on the sides. The CIM0430HW produces full-sized cubes that measure 7/8" x 7/8" x 3/8". Half cubes are ideal for dispensing applications since the smaller cube is less likely to jam the dispenser mechanism. With half cube ice, more cubes can fit in each glass, so half cube ice is popular with beverage retailers since there is more liquid displacement per glass. Note that the Ice-O-Matic CIM0430HW requires a 115 volt electrical connection, two incoming water lines (one for making ice and one for cooling the condenser), and an external drain for both the purged water remaining after each ice making cycle PLUS the water that was used to transfer the heat from the condenser. Therefore, since it is a water-cooled ice machine, the CIM0430HW will use and flush an additional 169 gallons of water for every 100 LB of ice produced. However, the primary benefits to water-cooled ice machines are there will be no hot air vented into the surrounding area and no side clearance for intake and exhaust vents is required. Therefore, the Ice-O-Matic CIM0430HW would suit a business location with limited wall space or pre-existing high room temperature conditions. The Ice-O-Matic B55PS storage bin is 30" wide like the cube head. The storage bin can hold up to 510 LB of ice. The B55PS measures 50" high by itself, including the adjustable 6" legs. The Ice-O-Matic B55PS is constructed with a stainless steel exterior and an inner polyethylene bin liner. A layer of foam insulation is inserted between the two surfaces to better preserve your ice. The plastic bin door is located on the front of the bin and flips up for easy access for scooping ice. The Ice-O-Matic B55PS also includes a bin drain, located at the back of the bin, which prevents accumulation of water from melted ice. This means there is less chance that bacteria or other organisms might grow in the bin. Both pieces of the Ice-O-Matic CIM0430HW-B55PS combo are constructed from corrosion resistant stainless steel and a fingerprint proof plastic. The low profile CIM0430HW cuber head mounts on top of the bin, so the total height of the CIM0430HW/B55PS equipment combination is 71" high. Both of these pieces of equipment are 30" wide. If your business has a moderate daily ice requirement and limited wall space or low ceiling height, the Ice-O-Matic CIM0430HW/B55PS cuber head/storage bin combo would be a good fit.

Ice-O-Matic CIM0430HW Features

  • Stainless Steel Exterior construction
  • Durable, Nickel Plating on Evaporator
  • Corrosion Resistant
  • Built in Agion antimicrobial protection
  • Dishwasher safe, Plastic Food Zone Parts snap in and out for easy cleaning
  • Produces up to 460 LB / 24 hours
  • Produces Half Cube ice
  • Self-contained, Water-cooled Condenser
  • Refrigerant: R404a
  • Universal Smart Harness control board for easy install, diagnostics, and servicing
  • 115 Volt, 60 Hz, 1-phase, 10.7 amps electrical
  • 20 PSIG minimum water pressure for operation

Ice-O-Matic B55PS Features

  • Ice Storage Bin
  • Up to 510 LB storage capacity
  • 30" Wide
  • 6" Adjustable Large Door Opening For Scooping or Shoveling Ice
  • Allows Easy Access To Ice Without A Stepping Stool
  • Durable Stainless steel bin exterior
  • Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation

Overall Dimensions

  • Left to Right: 30 1/4"
  • Front to Back: 31"
  • Height: 71 1/4"
View all Description
Specification Specifications
Ship Weight 280 LB
Manufacturer Ice-O-Matic
Model Number CIM0430HW/B55PS
Manufacturer Part # CIM0430HW/B55PS
Color Silver
Oversized Shipping No
Hazardous Material No
Dimensions(WxDxH) 30-1/4" x 31" x 71-1/4"
Phase 1
Amps 10.7 Amps
Volts 115
Hertz 60
24 Hour Ice Yield 460 Pounds
Bin Storage Capacity 510 Pounds
Condenser Type Water Cooled
Ice Type Half Size Cubes
Power Usage 4.75 kWh per 100 lbs.
Water Usage 17.8 Gallons per 100 lbs.
View all Specifications
NSF Listed
NSF Listed
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made In America
Made In America
This item was made in the United States of America.
UL Listed
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
CE Listed
CE Listed
This item complies with the standards by the Conformance European (CE), a division of the Intertek group.
BPA Free
BPA Free
This item is free of the chemical Bisphenol A (BPA) and is safe for food contact.
Hardwired
Hardwired
This product must be hardwired; it does not plug into a standard wall outlet.
Proposition 65
Proposition 65
Proposition 65 requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.
$3,612.10
Each
Buy on credit
Free Shipping
?
Free Shipping
Contiguous U.S. Only
Shipping
Typically Ships Within 3-4 Weeks
  • Stainless Steel Exterior construction
  • Durable, Nickel Plating on Evaporator
  • Corrosion Resistant
  • Allows Easy Access To Ice Without A Stepping Stool
  • Durable Stainless steel bin exterior
  • Warranty Info
    • 3 Years Parts & Labor on Ice Machine
    • 5 Years Parts Coverage on Evaporator and Compressor
    • 2 Year Parts & Labor On The Storage Bin