The Ice-O-Matic ICE0606FA-CD40130 is a 30" wide air-cooled ice maker combined with a vending Hotel Ice and Water Dispenser. The equipment combo requires the ICE0606FA cuber head to be mounted on the ice dispenser.
The Ice-O-Matic ICE0606FA ice machine cabinet is only 20" high and 30" wide. Note that since the cuber head has an air-cooled condenser, it requires a minimum of 6" of air vent clearance on the right side and the back for proper functioning, per Ice-O-Matic. The ICE0606FA has an ice production rate of 650 pounds of full cube ice every 24 hours. The full-sized cube ice the Ice-O-Matic ICE0606FA produces measures 7/8" wide x 7/8" deep x 7/8" high and so it takes a longer time to melt. The full-sized cubes are typically used for retail beverages, especially high-end drinks that require minimal dilution from melting ice. Full Cubes are also popular for ice bagging applications for retail sale because of their larger size.
Note that for proper installation, the Ice-O-Matic ICE0606FA requires a 208-230 volt electrical connection, plus a potable incoming water line. The ICE0606FA uses 19.5 gallons of water for each 100 pounds of ice it makes. The installation location should have an external drain for purged mineral-laden water that remains after every ice-making cycle. In addition, this model only uses 5.0 kWH electricity for every 100 pounds of ice produced. To shorten the ice-making cycle, Ice-O-Matic has included their Harvest-Assist technology, which quickly removes ice from the evaporator. This saves both time and electricity over the life of the Ice-O-Matic ICE0606FA. All of these efficiencies help the ICE0606FA earn an ENERGY STAR qualified rating.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice and water dispenser. The CD40130 dispenser unit is 54 inches tall and is a freestanding model. The CD40130 dispenser is not only an ice dispenser. It also has a factory-installed water dispensing chute for additional convenience (note that the CD40130 dispenser will therefore require its own incoming potable water line). The hotel ice dispenser has its own built-in ice storage bin with a capacity of up to 180 pounds of ice. With its push activation feature, a large dispensing chute, and a wide ice-filling area, operating the CD40130 is easy for your customers or employees. Ice-O-Matic has incorporated its Turbo Dispense technology, which allows ice to be dispensed at speeds of 1/4 pound of per second. In addition, the CD40130 hotel ice dispenser's exterior is smudge and fingerprint proof. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source at the installation location. You will also need an external drain for water forming at the bottom of the internal bin (you can use the same drain for both the cuber head and the CD40130 ice dispenser).
The ICE0606FA and the CD40130 equipment combination stands 74 inches high and 30 inches wide when properly configured. The equipment combo takes up very little space and so the ICE0606FA-CD40130 combo would be a great choice for a business with moderate daily ice requirements, but limited space for installation. With 650 pounds of ice produced every day and a storage capacity of 180 pounds, your customers or employees are likely to have ice available for dispensing at any time day or night.