The Ice-O-Matic CIM0636FW/CD40130 is a combination of the Ice-O-Matic CIM0636FW water-cooled ice machine and the CD40130 hotel dispenser. The CIM0636FW is designed to be mounted on top of the CD40130 dispenser. The Ice-O-Matic CIM0636FW cuber head is only 20" tall and 30" wide. The CIM0636FW is capable of producing 620 pounds of Full Cube ice every 24 hours. The CIM0636FW produces a Full Cube that measures 7/8" x 7/8" x 7/8" and which is popular for use in retail beverages. Because of its larger size, it takes longer to melt and there is less dilution of beverages. Full cube ice is ideal for on-the-rocks beverages and therefore the CIM0636FW would be a good choice for a bar location. For installation, the Ice-O-Matic CIM0636FW requires a 208-230 volt electrical power source. The Cuber Head also needs 2 incoming water lines (one incoming potable water line for making the ice and another water line for cooling the condenser). Note that the CIM0636FW will use a large amount of water (19.2 gallons of water for making ice and an additional 180 gallons of water to cool the condenser - for every 100 pounds of ice produced). The Ice-O-Matic CIM0636FW therefore requires an external drain that can handle a high volume of water, since all of the condenser water must be flushed after each ice making cycle. However, please note that with water-cooled ice machines, there will be no hot air vented into the location, so the surrounding area will be cooler than if it were an air-cooled model. Also, since water-cooled ice machines don't need any side air vent clearances, the Ice-O-Matic CIM0636FW can be installed in locations as narrow as 30 inches. The Ice-O-Matic CD40130 Hotel Ice & Water Dispenser is a freestanding model, 30 inches wide and 54 inches tall. The dispenser has a built-in ice bin which can store 180 pounds of ice. The CD40130 model has an additional water dispensing feature. Therefore you will need an additional potable water line for the water dispenser. The CD40130 features push activation, it has a large dispensing chute, and a wide ice and water filling area for your customers or employees. Ice-O-Matic's Turbo Dispense technology allows ice to be dispensed at a speed of 1/4 pound of ice per second so there is no waiting for ice. With the added water dispensing feature, your ice vending location will serve as a one-stop destination. For installation purposes, the Ice-O-Matic CD40130 has a 115-Volt, 60Hz, 1-Phase electrical requirement. The CD40130 also needs an external drain for water that forms in the dispenser's bin from melting ice (you can use the same external drain for the ice maker and the ice dispenser). When configured properly, the CIM0636FW/CD40130 equipment combination stands 74 inches high and 30 inches wide. The CIM0636FW/CD40130 combo would work well for a business with moderate daily ice requirements and minimal wall space in the installation location.
Ice-O-Matic CIM0636HW Features:
- Stainless Steel Exterior construction
- Durable, Nickel Plating on Evaporator
- Corrosion Resistant
- Built in Agion antimicrobial protection
- Dishwasher safe, Plastic Food Zone Parts snap in and out for easy cleaning
- Produces up to 620 LB / 24 hours
- Produces Full Cube ice
- Self-contained, Water-cooled Condenser
- Refrigerant: R404a
- Dual Exhaust from side or top for more installation options
- Universal Smart Harness control board for easy install, diagnostics, and servicing
- 208-230 Volt, 60 Hz, 1-phase electrical
- 20 PSIG minimum water pressure for operation
Ice-O-Matic CD40130 Features
- Vending Hotel Ice Dispenser
- Floor Model, Push Activated Dispensing w/ Water Dispenser
- 180 LB Ice Storage Capacity, 30" Wide
- Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
- 115v/60/1-ph, 2.1 amps
Left to Right: 30 1/2"
Front to Back: 33 1/2"
Height: 74 1/2"
|Ship Weight||390 LB|
|Manufacturer Part #||CIM0636FW/CD40130|
|Amps||9 (Ice Machine Head), 2.1 (Dispenser)|
|Voltage||208-230v (Ice Machine); 115v (Ice Dispenser)|
|Overall Dimensions (HxWxD)||74-1/2" x 30-1/4" x 33-1/2"|
|24 Hour Ice Yield||620 Pounds|
|Bin Storage Capacity||180 Lbs.|
|Dispenser Style||Push Button|
|Condenser Type||Water Cooled|
|Ice Type||Full Size Cubes|
|Ice Machine Power Usage||4.27 kWh per 100 lb|
|Type||Ice Machines with Dispensers|
|Ice Machine Water Usage||19.2 Gallons per 100 lb|
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made In America
This item was made in the United States of America.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
Proposition 65 requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.
Buy on credit
Contiguous U.S. Only
- 3 Years Parts & Labor On Ice Machine
- 5 Years Parts Coverage On Evaporator and Compressor
- 3 Years Parts & Labor On Dispenser