Ice-O-Matic CIM0636HA-CD40130 650 LB 30" Air-Cooled Ice Machine w/ CD40130 Hotel Dispenser
The Ice-O-Matic CIM0636HA-CD40130 is a 30" wide air-cooled ice machine mounted on an ice storage bin. The combo is two separate pieces of equipment designed to be installed together.
The Ice-O-Matic CIM0636HA cuber head has a production rate of 650 pounds of Half Cube ice every 24 hours, which works out to 27 pounds of ice every hour of operation. The half cube ice that the Ice-O-Matic CIM0636HA makes measures 7/8" wide x 7/8" deep x 3/8" high. With its smaller size, half cube ice is suitable for dispensing applications, since it is less likely to jam the dispenser. Half Cube ice is also popular for use with retail beverages. Since more of the smaller cubes can fit in a glass, there is greater liquid displacement and thus less beverage per serving.
Note that for installation purposes, the Ice-O-Matic CIM0636HA's cabinet is only 20" high and 30" wide. The CIM0636HA ice machine is an air-cooled unit, so when installing the unit, be certain that there is a minimum of 6" of air circulation clearance on the right side and the back for air intake and exhaust vents. The ICE0606HA needs good air circulation at the vents for proper functioning of the ice machine.
The Ice-O-Matic CIM0636HA requires a 115-volt electrical connection, a potable water line in, and a drain for the purged mineral-laden water after each ice-making cycle. The cuber head only uses 19.5 gallons of water and only 5.0 kWH electricity for every 100 pounds of ice it produces. In addition, the Ice-O-Matic CIM0636HA uses Harvest-Assist technology to quickly dislodge ice from the evaporator surface, which shortens each ice-making cycle so that you use less electricity. The efficient use of water and electrical resources helps the CIM0636HA earn its ENERGY STAR rating.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice and water dispenser. The dispenser unit is a freestanding configuration and measures 54 inches tall without the cuber head. The CD40130 dispenser dispenses ice, plus it also has a factory-installed water dispensing chute for additional convenience (the CD40130 dispenser will therefore require a separate incoming potable water line). The hotel ice dispenser has its own built-in ice storage bin with a capacity of up to 180 pounds of ice. The Ice-O-Matic CD40130 unit has a compact cabinet, allowing convenient ice and water dispensing in locations with limited space. With its push activation feature, a large dispensing chute, and a wide ice-filling area, the CD40130 is easy for your customers or employees to operate. Ice-O-Matic has also included its Turbo Dispense technology, which allows ice dispensing at speeds of 1/4 pound of per second. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source for proper functioning. The installation location also requires an external drain for water forming on the bottom of the built-in bin from melted ice (you can use the same drain for both the cuber head and the ice dispenser).
When properly stacked and configured, the CIM0636HA and the CD40130 equipment combination stands 74 inches high and 30 inches wide. With these external dimensions, the 650 LB daily ice production rate and the 180 LB bin capacity, the CIM0636HA-CD40130 combo should be considered for a business with moderate ice requirements and restricted wall space where you are installing the equipment.
Ice-O-Matic CIM0636HA Features
Ice-O-Matic CD40130 Features
|Ship Weight||175 LB|
|24 Hour Yield||650 LB|
|Ice Type||Half Cube|
|Dimensions(HxWxD)||20.06" x 30.13" x 24.25"|
|Water Usage||19.5 gal/100 LB|
|Ship Weight||224 LB|
|Dimensions(HxWxD)||53.25" x 30" x 33.5"|
|Dispenser Type||Ice and Water|
A PDF viewer is required to view this product's information.:Download Manufacturer's Specification Sheet