The Ice-O-Matic CIM0636HW/CD40030 is a combination of the Ice-O-Matic CIM0636HW ice machine and the CD40030 hotel ice dispenser. The CIM0636HW cuber head is designed to be mounted on top of the CD40030 dispenser. The Ice-O-Matic CIM0636HW cuber head is only 21" tall and 30" wide. The cuber head's cabinet is constructed from a durable stainless steel front panel and fingerprint-proof plastic side panels. The CIM0636HW is capable of producing 620 pounds of Half Cube ice every 24 hours. The Half Cube produced by the CIM0636HW measures 7/8" x 7/8" x 3/8" and this smaller cube works well in dispensers because they are less likely to jam the dispenser. In addition, retailers select the Half Cube for their beverages because more of the Half Cubes can fit in each glass, which means there is less beverage per serving. When planning on your installation location, note that the Ice-O-Matic CIM0636HW requires a 208-230 volt electrical connection and 2 incoming water lines. The first water line should be potable water for making the ice (19.2 gallons of water per 100 pounds of ice). The second water line uses significantly more water because it is used to cool the condenser (it works out to an additional 180 gallons of water per 100 pounds of ice produced will be flushed). The Ice-O-Matic CIM0636HW therefore requires an external drain that can handle the high volume of water. There is a small amount of mineral-laden water purged at the end of each ice making cycle. However, ALL of the condenser water must be drained, which can work out to 865 Gallons of water over the course of 24 hours of ice making. One benefit of having a water-cooled ice machine is that there will be no hot air discharged into the location, so the work environment remains cooler. Also, water-cooled ice machines don't need any side clearances for air vents, so the Ice-O-Matic CIM0636HW can be installed directly adjacent to other equipment or in narrow spaces. The Ice-O-Matic CD40030 Hotel Ice Dispenser is a freestanding unit measuring 30 inches wide and 54 inches tall. The CIM0636HW mounts on top of the dispenser and drops its ice into the CD40030's 180-pound capacity, built-in bin. The dispenser has a push activation feature, a large dispensing chute, and a wide ice-filling area so that nearly any ice bucket can be used. In addition, Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a speed of 1/4 pound of ice per second. The CD40030's cabinet exterior is also smudge and fingerprint proof. For proper installation of the Ice-O-Matic CD40030, the location will require a 115-Volt, 60Hz, 1-Phase electrical power source. Please note that the hotel ice dispenser also needs an external drain for water forming in the bin from melting ice (you can use the same external drain for both the ice machine and the ice dispenser). When properly configured, the CIM0636HW/CD40030 equipment combination stands 74 inches high and 30 inches wide. With these external dimensions, plus the production and storage capacities of the units, the CIM0636HW/CD40030 cuber/dispenser combo is a smart choice for a business that has limited space for installation and moderate daily ice consumption.
Ice-O-Matic CIM0636HW Features:
- Stainless Steel Exterior construction
- Durable, Nickel Plating on Evaporator
- Corrosion Resistant
- Built in Agion antimicrobial protection
- Dishwasher safe, Plastic Food Zone Parts snap in and out for easy cleaning
- Produces up to 620 LB / 24 hours
- Produces Half Cube ice
- Self-contained, Water-cooled Condenser
- Refrigerant: R404a
- Dual Exhaust from side or top for more installation options
- Universal Smart Harness control board for easy install, diagnostics, and servicing
- 208-230 Volt, 60 Hz, 1-phase electrical
- 20 PSIG minimum water pressure for operation
Ice-O-Matic CD40030 Features
- Vending Hotel Ice Dispenser
- Floor Model, Push Activated Dispensin
- 180 LB Ice Storage Capacity, 30" Wide
- Turbo Dispense feature Dispenses 1/4 LB Of Ice Per Second
- 115v/60/1-ph, 2.1 amps
Left to Right: 30 1/2"
Front to Back: 33 1/2""
Height: 74 1/2"
|Ship Weight||390 LB|
|Manufacturer Part #||CIM0636HW/CD40030|
|Amps||9 (Ice Machine Head), 2.1 (Dispenser)|
|Voltage||208-230v (Ice Machine); 115v (Ice Dispenser)|
|Overall Dimensions (HxWxD)||74-1/2" x 30-1/4" x 33-1/2"|
|24 Hour Ice Yield||620 Pounds|
|Bin Storage Capacity||180 Lbs.|
|Dispenser Style||Push Button|
|Condenser Type||Water Cooled|
|Ice Type||Half Size Cubes|
|Ice Machine Power Usage||4.27 kWh per 100 lb|
|Type||Ice Machines with Dispensers|
|Ice Machine Water Usage||19.2 Gallons per 100 lb|
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made In America
This item was made in the United States of America.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
Proposition 65 requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.
Buy on credit
Contiguous U.S. Only
- 3 Years Parts & Labor On Ice Machine
- 5 Years Parts Coverage On Evaporator and Compressor
- 3 Years Parts & Labor On Dispenser