The Ice-O-Matic ICE0250FA is an air-cooled ice machine with a production rate of up to 336 pounds of full cube ice in a 24 hour period. Since the Ice-O-Matic ICE0250FA is an air-cooled unit, it will require a minimum of 6" of clearance on the right side and back for air intake and exhaust vents. The full-sized cube ice that the Ice-O-Matic ICE0250FA produces resists melting for a long time, because the full cube ice measures 7/8" wide x 7/8" deep x 7/8" high. Full sized cubes are ideal for beverages or for bagging ice. The Ice-O-Matic ICE0250FA is easy to install, since it only requires a 115 volt electrical connection, a water line in, and a drain for purged water at the end of each ice-making cycle. In addition, the Ice-O-Matic ICE0250FA uses Harvest-Assist technology to help remove ice from the evaporator surface more quickly, saving time and electricity each ice-making cycle.
The Ice-O-Matic B40PS storage bin is 30 inches wide and can hold 344 LB of ice. The storage bin is a total of 37.5" high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B40PS with a stainless steel exterior and an inner polyethylene liner with a layer of foam insulation between, to preserve your ice for long periods. The bin door is molded plastic and flips up for easy access to ice for scooping. A bin drain is located at the back of the unit.
With the low profile cuber head sitting on top of the bin, the total height of the equipment combination is only 57.5" high. Both of these pieces of equipment are 30 inches wide and the cuber head sits perfectly flush on the storage bin. With these dimensions, the Ice-O-Matic ICE0250FA-B40PS cuber head and bin combo is ideal for locations with a moderate daily ice requirement and limits to their ceiling overhead space.