Ice-O-Matic ICE0250FW-B25PP 333 LB 30" Water-Cooled Full Cube Ice Machine w/ Storage Bin

Free Shipping
Ships Same Day
See price before order confirmation. What's this?
In stock
Ship Weight 150 LB
24 Hour Yield 333 LB
Condenser Water-Cooled
Ice Type Full Cube
Dimensions(HxWxD) 20" x 30.13" x 24.25"
Hertz 60
Phase 1
Voltage 115
Water Usage 35 gal/100 LB
Water Usage for Condenser 177 gal/100 LB
Ship Weight 74 LB
Dimensions(HxWxD) 28" x 30" x 31"
Capacity 242 LB

The Ice-O-Matic ICE0250FW-B25PP is a combination of the Ice-O-Matic ICE0250FW water-cooled full cube ice machine and the B25PP storage bin. The Ice-O-Matic ICE0250FW is capable of producing up to 333 LB of Full Sized cube ice in a day. The Full Sized Cube measures 7/8" x 7/8" x 7/8" and is ideal for cooling off beverages without diluting the drink. The Ice-O-Matic ICE0250FW requires a 115 volt electrical connection, 2 incoming water lines (one potable and one for cooling), and a drain for both the run off from ice making AND the cooling of the condenser. Because it is water-cooled, the ICE0250FW will use significantly more water than a comparable air-cooled model (up to 177 gallons per 100 LB of ice produced). However, there will be no hot air vented into the area and the unit will not require any additional side clearances. Therefore, the Ice-O-Matic ICE0250FW is a good solution when you have a narrow space.

The Ice-O-Matic B25PP storage bin is 30 inches wide and can hold 242 LB of ice. The storage bin is a total of 28" high with the adjustable legs measuring at 6". Ice-O-Matic has constructed the B25PP with a rotocast plastic exterior and an inner polyethylene liner with a layer of foam insulation between to preserve your ice for long periods. The bin door is molded plastic and flips up for easy access to ice for scooping. A bin drain is located at the back of the unit.

With the Ice-O-Matic ICE0250FW cuber head sitting on top of the B25PP bin, the total height of the equipment combination is only 48" high. At this height, the Ice-O-Matic ICE0250FW-B25PP cuber head and bin combo is ideal for locations with a moderate daily ice requirement and strict limits to ceiling overhead and left-to-right space. And the water-cooled model will allow you to avoid the vented hot air of an air-cooled model.

Ice-O-Matic ICE0250FW Features

  • ICE Series Modular Cube Ice Machine
  • Up to 333 LB ice production / 24 hours
  • 30" Wide Cuber Head is Low Profile at 20" High
  • Water-cooled condenser
  • Constructed From Corrosion-Resistant Stainless Steel and Fingerprint-Proof Plastic
  • PURE ICE Built-In Antimicrobial Protection
  • Durable, Electroless Nickel Plating On All Evaporator Plates Ensures Reliability

Ice-O-Matic B25PP Features

  • Ice Storage Bin
  • Up to 242 LB storage capacity
  • 6" Adjustable Legs
  • Large Door Opening For Scooping or Shoveling Ice
  • Allows Easy Access To Ice Without A Stepping Stool
  • Stainless steel bin exterior
  • Polyethylene Bin Liner Is Insulated w/ Foam For Maximum Ice Preservation
More Information
Warranty Info
  • 3 Years Parts & Labor on Ice Machine
  • 5 Years Parts Coverage on Evaporator and Compressor
  • 2 Year Parts & Labor On The Storage Bin
  • Brand Ice-O-Matic
    24/hr Ice Production 200 - 400 lbs
    Ice Type Full Cube
    Condenser Water-Cooled
    Voltage 115V
    Bin Width 30 in.
    Ice Storage Capacity 200 - 300 lbs
    © 2003-2016 IceMachinesPlus All Rights Reserved.