The Ice-O-Matic ICE0400FA-B40PS is a 30" wide air-cooled ice machine with a production rate of up to 505 pounds of full cube ice in a 24 hour period combined with an ice storage bin. The unit cabinet is only 20" high. Since the Ice-O-Matic ICE0400FA is an air-cooled unit, it will require a minimum of 6" of air circulation clearance on the right side and the back for air intake and exhaust vents. The full-sized cube ice produced by the Ice-O-Matic ICE0400FA takes a longer time to melt, since the full cube ice measures 7/8" wide x 7/8" deep x 7/8" high. Full-sized cubes are often used for retail beverages or for bagging ice. Since the Ice-O-Matic ICE0400FA only requires a 115 volt electrical connection, a water line in, and a drain for purged water at the end of each ice-making cycle, it is easy to install. In addition, the Ice-O-Matic ICE0400FA uses Harvest-Assist technology to increase the speed of ice removal from the evaporator surface, saving time and electricity each ice-making cycle.
The Ice-O-Matic B40PS storage bin is also 30" wide and it can hold 344 LB of ice. The storage bin is a total of 37.5" high, including the adjustable 6" legs. Ice-O-Matic has designed the B40PS with a stainless steel exterior and a polyethylene bin liner with a layer of foam insulation between, to keep your ice for long periods. The plastic bin door flips up for easy access to your ice. A bin drain is located at the back of the unit to remove any standing water created by melting ice.
With the low profile ICE0400FA cuber head sitting on top of the B40PS bin, the total height of the equipment combination is only 57.5" high. With these dimensions, the Ice-O-Matic ICE0400FA-B40PS cuber head and bin combo is ideal for locations with a moderate daily ice requirement and limits to their installation space.