The Ice-O-Matic ICE0400FA-CD40130 is an air-cooled modular ice machine that is to be mounted on the hotel ice dispenser. The equipment combination comes as two separate equipment pieces and is designed to be stacked.
The Ice-O-Matic ICE0400FA cuber head has an ice production rate of 505 pounds of full cube ice every day. The ICE0400FA's cabinet is 30 inches wide and 20 inches high. The Ice-O-Matic ICE0400FA has an air-cooled condenser, and therefore the unit requires a minimum of 6 inches of clearance on the right side and at the back of the unit for air vent circulation. The full-sized cube ice that the Ice-O-Matic ICE0400FA makes measures 7/8" x 7/8" x 7/8". Full-sized cubes are often used for retail beverages or for bagging ice because they are larger and they take longer to melt. For installation, the Ice-O-Matic ICE0400FA requires a 115 volt electrical connection, a potable water line in, and a drain for any purge water that didn't freeze at the end of each cycle of ice-making. The Ice-O-Matic Harvest-Assist technology in the ICE0400FA cuber head removes ice more quickly from the evaporator surface, which saves time and electricity every ice-making cycle.
The Ice-O-Matic CD40130 Hotel Ice Dispenser is a 30-inch wide hotel ice dispenser. The CD40130 dispenser not only dispenses ice but also has a factory-installed water dispensing chute for additional convenience (note that the CD40130 will require an incoming water line). The hotel ice dispenser has its own built-in storage bin with a capacity of up to 180 pounds of ice at one time. The Ice-O-Matic CD40130 dispenser unit stands at 54 inches tall. The CD40130 unit takes up very little wall space, allowing convenient ice and water dispensing in locations with minimal wall space. With its push activation feature, a large dispensing chute, and a wide ice-filling area, the CD40130 can accommodate most ice buckets that your customers or employees may use. Ice-O-Matic has also included its Turbo Dispense technology, so ice is dispensed at a speed of 1/4 pound of ice per second. In addition, the CD40130 hotel ice dispenser's exterior is smudge and fingerprint proof so it can stand up to heavy customer traffic. Note that the Ice-O-Matic CD40130 requires a 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain for water from ice that may have melted in the dispenser's bin (you can use the same drain for both the ICE0400FA cuber head and the CD40130 ice dispenser).
When installed with the ICE0400FA cuber head mounted on the CD40130, the equipment combination stands 74 inches high. Both units are 30 inches wide and are designed to sit flush with one unit atop the other. With these physical dimensions, the large 505 LB daily ice production rate and the 180 LB bin capacity, the ICE0400FA-CD40130 combo would work well for a hotel or business with moderate ice requirements and limited wall space.