The Ice-O-Matic ICE0400HA-B55PS is a 30" wide, air-cooled modular ice machine combined with an ice storage bin. This equipment combo is shipped as separate items and are designed to be installed with the ICE0400HA cube head mounted on the bin.
The Ice-O-Matic ICE0400HA cuber head has a production rate of up to 505 pounds of full cube ice in a 24 hour period. The cabinet of the ICE0400HA is only 20" high. Since the Ice-O-Matic ICE0400HA is an air-cooled model, it does require a minimum of 6" of clearance on the right side and the back of the unit for proper air circulation. The half-sized cube ice produced by the Ice-O-Matic ICE0400HA measures 7/8" wide x 7/8" deep x 3/8" high. Half cube ice is ideal for dispensers because their smaller size means fewer dispenser jams. Plus retailers appreciate that you can fit more half cubes of ice in each glass, meaning more liquid displacement than a large cube. Installing the Ice-O-Matic ICE0400HA is relatively easy, since it only requires a 115 volt electrical connection, a water line in, and a drain for the mineral-laden water that didn't freeze at the end of each ice-making cycle and must to be purged. In addition, Ice-O-Matic has incorporated its Harvest-Assist technology into the ICE0400HA in order to more quickly remove ice from the evaporator surface, which saves both time and electricity every ice-making cycle.
The Ice-O-Matic B55PS storage bin is also 30" wide and it can hold up to 510 LB of ice. The B55PS storage bin by itself is a total of 50" high, including the adjustable 6" legs. The Ice-O-Matic B55PS is constructed with a stainless steel exterior and a polyethylene bin liner with a layer of foam insulation between. The molded plastic bin door flips up for easy access to your ice. In addition, a bin drain is located at the back of the B55PS to remove any standing water that might form from melted ice.
The Ice-O-Matic ICE0400HA-B55PS equipment combo is constructed from corrosion resistant stainless steel and fingerprint proof plastic, making it a durable choice. With the ICE0400HA cuber head sitting on top of the B55PS bin, the total height of the equipment combination only reaches to 70" high. With these physical dimensions, the Ice-O-Matic ICE0400HA-B40PS cuber head and bin combo is ideal for businesses with a moderate daily ice requirement and space restrictions.