The Ice-O-Matic ICE0400HA-CD40030 is an air-cooled modular cuber head combined with a freestanding hotel ice dispenser. The equipment combination comes as two separate equipment pieces and is designed for the ice machine cuber head to be mounted on the dispenser.
The Ice-O-Matic ICE0400HA ice machine head has a production rate of up to 505 pounds of half-sized cube ice in a 24-hour period. The ICE0400HA's cabinet is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0400HA is an air-cooled model, and therefore requires a minimum of 6" of clearance on the right side and at the back of the cabinet, for proper air circulation at the intake and exhaust vents. The half cube ice produced by the Ice-O-Matic ICE0400HA measures 7/8" x 7/8" x 3/8". Half cube ice works well for dispensing applications because their smaller size means fewer dispenser jams. Plus retailers appreciate that you can fit more half cubes of ice in each glass, meaning more liquid displacement than a large cube. The Ice-O-Matic ICE0400HA requires a 115 volt electrical connection, a potable water line in, and a drain for any mineral-laden water that didn't freeze at the end of each ice-making cycle. Ice-O-Matic has also included its Harvest-Assist technology in the ICE0400HA to more quickly remove ice from the evaporator surface, which means each ice-making cycle is shorter, saving you time and electricity.
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30-inch wide hotel ice dispenser with its own built-in storage bin. The dispenser unit by itself stands at 54 inches tall. The Ice-O-Matic CD40030 takes up very little wall space, allowing convenient ice-dispensing in a narrow vending alcove or other location with minimal space. The Ice-O-Matic CD40030 can store up to 180 pounds of ice at one time, which means your customers or employees will most likely always have ice on hand. The CD40030's push activation feature, large dispensing chute, and wide ice filling area means that the Ice-O-Matic dispenser can accommodate nearly any size ice bucket that your customers or employees may use. In addition, Ice-O-Matic's Turbo Dispense technology means that ice is dispensed at a steady speed of 1/4 pound of ice per second, so there is no waiting for ice. The Ice-O-Matic CD40030 hotel ice dispenser's exterior is smudge and fingerprint proof for locations with heavy traffic. Note that the Ice-O-Matic CD40030 also requires 115 Volt, 60Hz, 1-Phase electrical power source. The installation location also requires a drain for water from ice that may have melted in the built in bin (you can use the same external drain for both the cuber head and the ice dispenser).
Together the ICE0400HA and the CD40030 equipment combination stand 74 inches high. Both units are 30 inches wide. With these dimensions, the 505 LB daily ice production rate and the 180 LB bin capacity, the ICE0400HA-CD40030 combo is a good choice for a business with moderate ice requirements and limited installation space.