The Ice-O-Matic ICE0500HA-CD40030 is an air-cooled modular ice machine combined with a hotel ice dispenser. This equipment combination comes as two separate equipment pieces and is designed for the ICE0500HA ice machine to be mounted on the dispenser.
The Ice-O-Matic ICE0500HA cuber head has a production rate of up to 565 pounds of half-cube ice in a 24-hour period. The cuber head's cabinet is 30 inches wide and only 20 inches high. The Ice-O-Matic ICE0H00FA is an air-cooled model, and therefore requires a minimum of 6" of vent clearance on the right side and at the back of the unit, per the manufacturer. The half-sized cube ice produced by the Ice-O-Matic ICE0500HA measures 7/8" x 7/8" x 3/8". The smaller cube is commonly used for ice dispensing and so will work well with the CD40130. For installation, the Ice-O-Matic ICE0500HA requires a 115 volt electrical connection, a potable water line in, and an external drain for any mineral-laden water purged at the end of each ice-making cycle. Ice-O-Matic has also incorporated its Harvest-Assist technology into the ICE0500HA in order to speed up the removal of ice from the evaporator surface. This means each ice-making cycle is shorter, saving electricity over the life of the unit, earning an ENERGY STAR rating for the ICE0500FA.
The Ice-O-Matic CD40030 Hotel Ice Dispenser is a 30 inch wide hotel ice dispenser with its own built-in storage bin. The ice dispenser unit stands at 54 inches tall by itself without the cuber. The Ice-O-Matic CD40030 takes up very little wall space, allowing convenient ice-dispensing when you have limited space for installation. The Ice-O-Matic CD40030 can store up to 180 pounds of ice at any one time. The dispenser has a push activation feature, a large dispensing chute, and a wide ice filling area. In addition, Ice-O-Matic's Turbo Dispense technology means that ice can be dispensed at a speed of 1/4 pound of ice per second. For installation, note that the Ice-O-Matic CD40030 requires a 115-Volt, 60Hz, 1-Phase electrical power source. The installation location also requires an external drain for melted ice water at the bottom of the bin (you can use the same external drain for both the cuber head and the CD40030 ice dispenser).
With the ICE0500HA cuber head mounted on the CD40030, the equipment combination stands 74 inches high. Both units are 30 inches wide. With these dimensions, the 565 LB daily ice production rate, and the 180 LB bin capacity, the ICE0500HA-CD40030 combo would work well for a business with moderate daily ice requirements and restricted installation space.